- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 17 Unipolar 1.8deg 16Ncm (22.7oz.in) 0.95A 4V 42x42x33mm 6 Wires
Nema 17 Unipolar 1.8deg 16Ncm (22.7oz.in) 0.95A 4V 42x42x33mm 6 Wires
Nema 17 Unipolar 1.8deg 16Ncm (22.7oz.in) 0.95A 4V 42x42x33mm 6 Wires
5
1
SKU: 17HS13-0956S
$9.24
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $8.43 | $8.03 | $7.63 | $7.23 |
| Save | 9% | 13% | 17% | 22% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.95A, with holding torque 16Ncm (22.7oz.in).
Electrical Specification
- Manufacturer Part Number: 17HS13-0956S
- Motor Type: Unipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 16Ncm(22.7oz.in)
- Rated Current/phase: 0.95A
- Voltage: 4V
- Phase Resistance: 4.2ohms
- Inductance: 2.5mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 33mm
- Shaft Diameter: Φ5mm
- Shaft Length: 20mm
- Number of Leads: 6
- Lead Length: 400mm
- Weight: 220g
Connection
A+ |
O+ |
A- |
B+ |
O- |
B- |
BLK |
YEL |
GRN |
RED |
WHT |
BLU |
Resources
- Full Datasheet: 17HS13-0956S.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Unipolar |
| Holding Torque(Ncm) | 16 |
| Holding Torque(oz.in) | 22.7 |
| Inductance(mH) | 2.5 |
| Phase Resistance(ohm) | 4.2 |
| Rated Current(A) | 0.95 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 33 |
| Frame Size(mm) | 42 x 42 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | O |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| No. of Lead | 6 |
| Lead Length(mm) | 400 |
| Weight(g) | 220 |
