Search

Electrical Specification Manufacturer Part Number: 34HP59-6004S Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 12 Nm(1700oz.in) Rated Current/phase: 6.0 A Phase Resistance: 0.72 ohms± 10% Inductance: 6.5 mH ± 20%(1KHz) Physical Specification Frame Size: 86 x 86 mm Body Length: 150.6 mm Shaf..

This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Electrical Specification Manufacturer Part Number: 24HS39-4204D Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding..

This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm (312oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 34HS26-2006D Motor Type: Unipolar Stepper Step ..

This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm (4248oz.in). Electrical Specification Manufacturer Part Number: 42HS79-8004S Step Angle: 1.8 deg Holding Torque: 30Nm(4248oz.in) Rated Current/phase: 8.0A Pha..

This Nema 23 stepper motor with 56mm body and 2.8A rated current, integrated a planetary gearbox of 46.656:1 gear ratio. It's a good solution to applications that with limited space but need low speed and/or high torque. Electrical Specification Manufacturer Part Number: 23HS22-2804S-PG47 Motor Type: Bipolar Stepp..