Search

This damper is for NEMA 17 stepper motors. It can effectively reduce noise and vibration generated from the running stepper motors. The package includes: 3 x ST-D1 Resources Full Datasheet: ST-D1.pdf ..

This bipolar pancake Nema 18 stepper motor with step angle 1.8deg and size Φ46x16 mm. It has 4 wires, each phase draws 1 A, with holding torque 9 Ncm (12.748 oz.in). Electrical Specification Manufacturer Part Number: 18HR06-1004S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 9 Ncm(12.748 ..

Elektrische Spezifikation Manufacturer Part Number: 57BLR43-36-01 Phase: 3 Poles: 4 Rated Voltage: 36V Rated Speed: 4400±10%RPM Rated Torque: 0.055Nm(7.79oz.in) Rated Current: 1±10%A Rated Power: 25W Insulation Class: Class B Insulation Resistance: 100MΩ Min @500VDC Dielectric Strength Test: 500VAC for 1 ..

Mainly used in medical equipment, dispensing machines, engraving machines, laser equipment, labeling machines, electronic equipment, advertising equipment and other automation equipment. It is particularly effective in applications where users expect low heat, low noise, low vibration, high stability, and high precisio..

This CNC kit included: 1 x Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor 1 x E Series Nema 23 Closed Loop Stepper Motor 1.2 Nm/170oz.in Encoder 1000CPR 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver 1 x RV-4 AWG20 1.7 m(67") Long Motor Extension Cable with GX1..

This CNC kit included: 1 x Closed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor 1 x E Series Nema 23 Closed Loop Stepper Motor 2.0 Nm/283.28oz.in Encoder 1000CPR 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver 1 x RV-4 AWG20 1.7 m(67") Long Motor Extension Cable ..

This CNC kit included: 1 x P Series Nema 34 Closed Loop Stepper Motor 4.5Nm/637.38oz.in with Encoder 1000CPR 1 x Closed Loop Stepper Driver 0~8.2A 24~80VDC for Nema 34 Stepper Motor 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver 1 x AWG18 1.7 m(67") Long Motor Extension Cable with GX16 Avia..

Electrical Specifications: Manufacturer Part Number: ISC04-10 Step Angle: 1.8 deg Holding Torque: 126 Ncm(178.4oz.in) Rated Current/phase: 2.8 A Phase Resistance: 0.9 ohms Inductance: 2.5 mH ± 20%(1KHz) Physical Specifications: Frame Size: 57 x 57 mm Body Length: 75 mm Shaft Diameter: Φ6.35 mm Shaft Length: 21 mm ..

Electrical Specifications: Manufacturer Part Number: ISC04-20 Step Angle: 1.8 deg Holding Torque: 190 Ncm(269oz.in) Rated Current/phase: 2.8 A Phase Resistance: 1.13 ohms Inductance: 5.4 mH ± 20%(1KHz) Physical Specifications: Frame Size: 57 x 57 mm Body Length: 96 mm Shaft Diameter: Φ6.35 mm Shaft L..