Search

This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.31.0A at 12V, with holding torque 15.8Ncm (22.4oz.in). Electrical Specification Manufacturer Part Number: 17HS13-0316S Motor Type: Unipolar Stepper Step Angle: 1.8 deg Holding Torque: ..

This closed loop nema 23 stepper motor with IP65 waterproof ratings and 2Nm(283.28oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted. Electrical Specification Manufacturer Part Nu..

This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31.0A at 12V, with holding torque 16Ncm (22.7oz.in). Electrical Specification Manufacturer Part Number: 17HM13-0316S Motor Type: Unipolar Stepper Step Angle: 0.9 deg Holding Torque: 16N..

This Nema 23 stepper motor with IP65 waterproof ratings and 1.8Nm(254.95oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted. Electrical Specification Manufacturer Part Number: 23IP..

This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31.0A at 12V, with holding torque 16Ncm (22.7oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HM13-0316D Motor Type: Unipolar Stepper Step Angle: 0.9..

This Nema 23 stepper motor with IP67 waterproof ratings and 2Nm(254.95oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes. Electrical Specification Manufacturer Part ..

Electrical Specification Manufacturer Part Number: 34HS46-6004S1 Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 8.5Nm(1203.94oz.in) Rated Current/phase: 6.0 A Phase Resistance: 0.7 ohms± 10% Inductance: 5.8 mH ± 20%(1KHz) Physical Specification Frame Size: 86 x 86 mm Body Length: 118 mm Sha..

This model is almost exactly same as Haydon Kerk 28000 series size 11 double stack non-captive stepper motor linear actuator. The motor part is 46mm body 1.8 degree 0.75A Nema 11 stepper motor, and it works with a 4.76mm (0.1874") diameter 250mm (9.8425") length lead screw, the linear travel is 0.635mm(0.025") per rev..

This model is almost exactly same as Haydon Kerk 28000 series size 11 double stack non-captive stepper motor linear actuator. The motor part is 46mm body 1.8 degree 0.75A Nema 11 stepper motor, and it works with a 4.76mm (0.1874") diameter 250mm (9.8425") length lead screw, the linear travel is 1.27mm(0.05") per revol..

This model is almost exactly same as Haydon Kerk 28000 series size 11 double stack non-captive stepper motor linear actuator. The motor part is 46mm body 1.8 degree 0.75A Nema 11 stepper motor, and it works with a 4.76mm (0.1874") diameter 250mm (9.8425") length lead screw, the linear travel is 2.54mm(0.1") per revolu..

This model is almost exactly same as Haydon Kerk 28000 series size 11 double stack non-captive stepper motor linear actuator. The motor part is 46mm body 1.8 degree 0.75A Nema 11 stepper motor, and it works with a 4.76mm (0.1874") diameter 250mm (9.8425") length lead screw, the linear travel is 5.08mm(0.2") per revolu..

This model is almost exactly same as Haydon Kerk 28000 series size 11 double stack external stepper motor linear actuator. The motor part is 46mm body 1.8 degree 0.75A Nema 11 stepper motor, and it has integrated with a 4.76mm (0.1874") diameter 250mm (9.8425") length lead screw and a POM screw nut, the linear travel i..