Search

This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer. Electrical Specification Manufacturer Part Number: 17..

Electrical Specification Manufacturer Part Number: 23HP45-4204S Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 3.0 Nm(425oz.in) Rated Current/phase: 4.2 A Phase Resistance: 0.9 ohms± 10% Inductance: 3.8 mH ± 20%(1KHz) Physical Specification Frame Size: 57 x 57 mm Body Length: 113 mm Shaft Diameter: Φ10 mm..

This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x26mm. It has 4 wires, each phase draws 0.4A at 12V, with holding torque 14Ncm (20oz.in). Electrical Specification Manufacturer Part Number: 14HS10-0404S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 14Ncm(20oz.in) Rated Curr..

This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 4 wires, each phase draws 0.8A at 5.4V, with holding torque 18Ncm (25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 18Ncm(25.5oz.in) Rated ..

This Nema 14 stepper motor is the strongest model in Nema 14 size motors, it with step angle 1.8deg and size 35x35x52mm. It has 4 wires, each phase draws 1.5A at 4.2V, with holding torque 40Ncm (56.7oz.in). Electrical Specification Manufacturer Part Number: 14HS20-1504S Motor Type: Bipolar Stepper Step Angle: 1.8 d..

This bipolar Nema 14 stepper motor with a hollow shaft. The shaft with 5mm OD and 3mm ID, It has 4 wires, each phase draws 0.8A at 5.4V, with holding torque 18Ncm (25.5oz.in). Electrical Specification Manufacturer Part Number: 14HS13-0804SH Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 18Nc..

This is the shortest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm (22.6oz.in). Note: Currently this motor STOCKED IN CHINA has two appearance,but with the same performance. One is black and the other is s..

This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.95A, with holding torque 16Ncm (22.7oz.in). Electrical Specification Manufacturer Part Number: 17HS13-0956S Motor Type: Unipolar Stepper Step Angle: 1.8 deg Holding Torque: 16Ncm(22.7oz.in) Ra..

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm (31oz.in). Electrical Specification Manufacturer Part Number: 17HS13-1334S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 22Ncm(31oz.in) Rated Cu..

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.85A at 5.4V, with holding torque 36Ncm (51oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0854S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 36Ncm(51oz.in) R..

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 1.68A, with holding torque 45Ncm (64oz.in). It's very good choice for 3D printer. Electrical Specification Manufacturer Part Number: 17HS19-1684S1 Motor Type: Bipol..

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm (62.3oz.in). It's very good choice for 3D printer, a rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS19-1684D Motor Type: Bipolar Stepper St..