Search

Electrical Specification Manufacturer Part Number: 22BLR40-24-01 Phase: 3 Poles: 4 Rated Voltage: 24V Rated Speed: 10000±10%RPM Noload Speed: 14000RPM Rated Torque: 0.008Nm(1.13oz.in) Rated Current: 0.72±10%A Noload Current: 0.25A Rated Power: 8.5W Insulation Class: Class B Insulation Resistance: 100MΩ M..

Electrical Specification Manufacturer Part Number: 42BLS47-24-01 Phase: 3 Poles: 8 Rated Voltage: 24V Rated Speed: 4000±10%RPM Rated Torque: 0.063Nm(8.92oz.in) Rated Current: 1.9±10%A Rated Power: 26W Insulation Class: Class B Insulation Resistance: 100MΩ Min @500VDC Dielectric Strength Test: 500VAC for 1..

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws very lower current 0.28A, with holding torque 36Ncm (51oz.in). Electrical Specification Manufacturer Part Number: 17HS16-0284S-C2 Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 3..

The BLDC driver is a high-performance, multi-functional, low-cost DC brushless driver with a Hall sensor. All-digital design makes it flexible and diverse input control mode, high speed ratio, low noise, perfect hardware and software protection functions, the driver can be connected to the computer through the serial c..

Electrical Specification Manufacturer Part Number: 52HT102-5003S Number of Phase: 3 Step Angle: 1.2 deg Holding Torque: 50 Nm(7082oz.in) Rated Current/phase: 5 A Phase Resistance: 2.75 ohms± 10% Inductance: 32 mH ± 20%(1KHz) Physical Specification Frame Size: 130 x 130 mm Body Length: 260 mm Shaft ..

This is a dual-shaft and low-speed motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Electrical Specification Manufacturer Part Number: 23HM20-0384D Motor Type: Bipolar Stepper Step Angle: 0..

This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 2A at 2.2V, with holding torque 45Ncm (63.7oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HS16-2004D-C1 Motor Type: Bipolar Stepper Step Angle: 1.8 de..

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 4 wires, each phase draws current 0.67A, with holding torque 22.6Ncm (32.09oz.in). Electrical Specification Manufacturer Part Number: 17HS13-0674S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 22.6Ncm(3..

This nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A at 2.8V, with holding torque 45Ncm (63.7oz.in). Electrical Specification Manufacturer Part Number: 17HS19-1684S-C1 Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 45Ncm(63.7oz.in)..

This bipolar Nema 23 stepper motor with step angle 1.8deg and size Φ57x28mm. It has 4 wires, each phase draws 0.5A, with holding torque 0.34Nm (48.61oz.in). Electrical Specification Manufacturer Part Number: 23HR11-0504S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 0.34Nm (48.61oz.in) Rat..

This bipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x76mm. It has 4 wires, each phase draws 4.00A, with holding torque 3.6N.m (509.90oz.in). Electrical Specification Manufacturer Part Number: 34HS30-4004S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 3.6N.m(509.90oz.in..

Motor Specification Manufacturer Part Number: 23HM20-0384D-E1000 Motor Type: Bipolar Stepper Step Angle: 0.9 deg Holding Torque: 0.9Nm(127.5oz.in) Rated Current/phase: 0.38A Voltage: 12.1V Phase Resistance: 32ohms Inductance: 110mH ± 20%(1KHz) Frame Size: 57 x 57mm Body Length: 52mm Shaft Diameter: Φ8mm..