Search

This bipolar Nema 14 stepper motor with step angle 0.9deg and size 35x35x20mm. It has 4 wires, each phase draws 0.5A, with holding torque 5Ncm (7.08oz.in). Electrical Specification Manufacturer Part Number: 14HM08-0504S Motor Type: Bipolar Stepper Step Angle: 0.9 deg Holding Torque: 5Ncm(7.08oz.in) Rated C..

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws very lower current 0.28A, with holding torque 36Ncm (51oz.in). Electrical Specification Manufacturer Part Number: 17HS16-0284S-C2 Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 36Ncm(51o..

This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.9A, with holding torque 36Ncm (51oz.in). Electrical Specification Manufacturer Part Number: 17HM15-0904S Motor Type: Bipolar Stepper Step Angle: 0.9 deg Holding Torque: 36Ncm(51oz.in) R..

Electrical Specification Manufacturer Part Number: 23HP30-2804S Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 1.9 Nm(269oz.in) Rated Current/phase: 2.8 A Phase Resistance: 1.13 ohms± 10% Inductance: 5.4 mH ± 20%(1KHz) Physical Specification Frame Size: 57 x 57 mm Body Length: 76 mm Shaft D..

This is a dual-shaft and low-speed motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Electrical Specification Manufacturer Part Number: 23HM20-0384D Motor Type: Bipolar Stepper Step Angle: 0.9 deg..

This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x52mm. It has 4 wires, each phase draws 2.0A, with holding torque 0.9Nm (127.5oz.in). Electrical Specification Manufacturer Part Number: 23HS20-2004S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 0.9Nm(127.5oz.in) Ra..

This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm (127.5oz.in). Electrical Specification Manufacturer Part Number: 23HS22-1006S Motor Type: Unipolar Stepper Step Angle: 1.8 deg Holding Torque: 0.9Nm(127.5oz.in) Ra..

This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 6 wires, each phase draws 1.0A, with holding torque 0.9Nm (127.5oz.in), a rear shaft is made for encoder or equals. Electrical Specification Manufacturer Part Number: 23HS22-1006D Motor Type: Unipolar Stepper Step Angle: 1..

Electrical Specification Manufacturer Part Number: 23HE30-2804S Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 1.9 Nm(269oz.in) Rated Current/phase: 2.8 A Phase Resistance: 1.13 ohms± 10% Inductance: 5.4 mH ± 20%(1KHz) Physical Specification Frame Size: 57 x 57 mm Body Length: 76 mm Shaft D..

This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm (269oz.in). Electrical Specification Manufacturer Part Number: 23HS30-2804S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 1...

This motor has a torque of 1.9Nm(269oz.in) and its shaft is a 9mm keyway shaft, it can fit with NMRV30 Worm Gearbox directly. Electrical Specification Manufacturer Part Number: 23HS30-2804S-RV Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 1.9Nm(269oz.in) Rated Current/phase: 2.8A Phase Res..

Electrical Specification Manufacturer Part Number: 23HS30-2694D Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 1.85 Nm(262.03oz.in) Rated Current/phase: 2.8 A Phase Resistance: 1.1 ohms± 10% Inductance: 5.4 mH ± 20%(1KHz) Physical Specification Frame Size: 57 x 57 mm Body Length: 76 mm Shaf..