Search

This closed loop nema 34 stepper motor with IP65 waterproof ratings and 8.5Nm(1203.94oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted. Electrical Specification Manufacturer Pa..

This Nema 34 stepper motor with IP65 waterproof ratings and 8.5Nm(1203.94oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted. Electrical Specification Manufacturer Part Number: 3..

This Nema 34 dual shaft stepper motor with size 86x86x114mm. It has 4 wires, each phase draws 5.0A, with holding torque 8.5Nm (1204oz.in). A rear shaft can mount encoder, hand wheel or equals. Electrical Specification Manufacturer Part Number: 34HS46-5004D Motor Type: Bipolar Stepper Step Angle: 1.8 ..

Electrical Specification Manufacturer Part Number: 34HS46-6004S1 Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 8.5Nm(1203.94oz.in) Rated Current/phase: 6.0 A Phase Resistance: 0.7 ohms± 10% Inductance: 5.8 mH ± 20%(1KHz) Physical Specification Frame Size: 86 x 86 mm Body Length: 118 mm Sha..

This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Electrical Specification Manufacturer Part Number: 34HS46-5004D1 Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding..

Electrical Specification Manufacturer Part Number: 34E1KBK50-85 Number of phase: 2 Step Angle: 1.8 deg Holding Torque: 8.5 Nm(1203.94 oz.in) Rated Current/phase: 6.0 A Phase Resistance: 0.54 ohms Inductance: 5.0 mH ± 20%(1KHz) Physical Specification Frame Size: 86 x 86 mm Body Length: 112.3 mm Shaf..

Electrical Specification Manufacturer Part Number: 34E1K-85 Number of phase: 2 Step Angle: 1.8 deg Holding Torque: 8.5 Nm(1203.94 oz.in) Rated Current/phase: 6.0 A Phase Resistance: 0.54 ohms Inductance: 5.0 mH ± 20%(1KHz) Physical Specification Frame Size: 86 x 86 mm Body Length: 149.3 mm Shaft Di..

This CNC kit included: 1 x P Series Nema 34 Closed Loop Stepper Motor 8.5Nm/1203.94oz.in with Encoder 1000CPR 1 x Closed Loop Stepper Driver 0~8.2A 24~80VDC for Nema 34 Stepper Motor 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver 1 x AWG18 1.7 m(67") Long Motor Extension Cable with GX1..

This CNC kit included: 1 x Digital Stepper Drive 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 Motor 1 x Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm Motor Specification Manufacturer Part Number: 34HS46-5004D Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 8.5Nm(1..

This CNC kit included: 3 x Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit 3 x 8.5Nm (1204oz.in) of Nema 34 Stepper Motor 3 x 350W 60V 5.9A 115/230V Switching Power Supply Driver Specification Anti-Resonance provides optimal torque and nulls mid-range instability Motor auto-ident..

This CNC kit included: 4 x Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit 4 x 8.5Nm (1204oz.in) of Nema 34 Stepper Motor 4 x 350W 60V 5.9A 115/230V Switching Power Supply Driver Specification Anti-Resonance provides optimal torque and nulls mid-range instability Motor auto-ident..