Search

This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer. Electrical Specification Manufacturer Part Number: 17..

Electrical Specification Manufacturer Part Number: 17IP65-06 Number of phase: 2 Step Angle: 1.8 deg Holding Torque: 0.59 Nm(83.57 oz.in) Rated Current/phase: 2.0 A Phase Resistance: 1.5 ohms Inductance: 3.0 mH ± 20%(1KHz) Physical Specification Frame Size: 42 x 42 mm Body Length: 47 mm Shaft Diameter: Φ5 mm Shaft..

Electrical Specification Manufacturer Part Number: 17HS15-1504S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 42Ncm(59.49oz.in) Rated Current/phase: 1.50A Phase Resistance: 2.0ohms Inductance: 3.9mH ± 20%(1KHz) Physical Specification Frame Size: 42 x 42mm Body Length: 39mm Sh..

This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A at 2.8V, with holding torque 59Ncm (83.78oz.in). Electrical Specification Manufacturer Part Number: 17HS19-2004D Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: ..

This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC and robotics applications. ..

This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC and robotics applications. ..

This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in) and a full d-cut shaft. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC and r..

This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC and robotics applications. ..

Electrical Specification Manufacturer Part Number: 34HE59-6004S Number of phase: 2 Step Angle: 1.8 deg Holding Torque: 12.0 Nm(1699.68oz.in) Rated Current/phase: 6.0 A Phase Resistance: 0.7 ohms± 10% Inductance: 7.9 mH ± 20%(1KHz) Physical Specification Frame Size: 86 x 86 mm Body Length: 151.5 mm S..

Electrical Specification Manufacturer Part Number: 34HS59-6004S Number of phase: 2 Step Angle: 1.8 deg Holding Torque: 12.0 Nm(1699.68oz.in) Rated Current/phase: 6.0 A Phase Resistance: 0.7 ohms± 10% Inductance: 7.9 mH ± 20%(1KHz) Physical Specification Frame Size: 86 x 86 mm Body Length: 151.5 mm S..

Electrical Specification Manufacturer Part Number: 34HP59-6004S Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 12 Nm(1700oz.in) Rated Current/phase: 6.0 A Phase Resistance: 0.72 ohms± 10% Inductance: 6.5 mH ± 20%(1KHz) Physical Specification Frame Size: 86 x 86 mm Body Length: 150.6 mm Shaf..

This is the strongest Nema 34 cnc stepper motor, it with size 86x86x150mm. It has 4 wires, each phase draws 5.0A, with holding torque 13Nm (1841oz.in). Electrical Specification Manufacturer Part Number: 34HS59-5004S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 13Nm(1841oz.in) Rated Current/phase..