Search

This closed loop nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted. Electrical Specification Manufacturer Par..

This Nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted. Electrical Specification Manufacturer Part Number: 34..

This Nema 34 stepper motor with IP67 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes. Electrical Specification Manufacturer Par..

Electrical Specification Manufacturer Part Number: 34HP29-6004S Number Of Phase: 2 Step Angle: 1.8 deg Holding Torque: 4.5 Nm(637.38oz.in) Rated Current/phase: 6.0 A Phase Resistance: 0.34 ohms± 10% Inductance: 2.5 mH ± 20%(1KHz) Physical Specification Frame Size: 86 x 86 mm Body Length: 74 mm Shaf..

This Nema 34 cnc stepper motor with size 86x86x80mm. It has 4 wires, each phase draws 5.5A, with holding torque 4.5Nm (637oz.in). Electrical Specification Manufacturer Part Number: 34HS31-5504S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 4.5Nm(637oz.in) Rated Current/phase: 5.5A Phase R..

This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Electrical Specification Manufacturer Part Number: 34HS31-5504D Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding ..

This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Electrical Specification Manufacturer Part Number: 34HS59-5004D Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding ..

Motor Specification Manufacturer Part Number: 34HS31-5504D-E1000 Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 4.5Nm(637oz.in) Rated Current/phase: 5.5A Voltage: 2.2V Phase Resistance: 0.4ohms Inductance: 3.5mH ± 20%(1KHz) Frame Size: 86 x 86mm Body Length: 108.5mm Shaft Diameter: Φ14m..

Electrical Specification Manufacturer Part Number: 34E1KBK50-45 Number of phase: 2 Step Angle: 1.8 deg Holding Torque: 4.5 Nm(637.38 oz.in) Rated Current/phase: 6.0 A Phase Resistance: 0.34 ohms Inductance: 2.4 mH ± 20%(1KHz) Physical Specification Frame Size: 86 x 86 mm Body Length: 74 mm Shaft Di..

This CNC kit included: 1 x P Series Nema 34 Closed Loop Stepper Motor 4.5Nm/637.38oz.in with Encoder 1000CPR 1 x Closed Loop Stepper Driver 0~8.2A 24~80VDC for Nema 34 Stepper Motor 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver 1 x AWG18 1.7 m(67") Long Motor Extension Cable with GX16..

This CNC kit included: 1 x Digital Stepper Drive 2.4-7.2A 18-80VAC or 36-110VDC for Nema 34 Motor 1 x Nema 34 CNC Stepper Motor 4.5Nm (637oz.in) 5.5A 86x86x80mm Key Way Shaft Motor Specification Manufacturer Part Number: 34HS31-5504S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 4.5..

This CNC kit included: 3 x Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit 3 x 4.5Nm (637oz.in) of Nema 34 Stepper Motor 3 x 350W 60V 5.9A 115/230V Switching Power Supply Driver Specification Anti-Resonance provides optimal torque and nulls mid-range instability Motor auto-identi..