Search

This model is economy linear stepper motor which named Nema 11 non-captive linear actuator, it was composed of 34mm 1.8 degree 0.75A Nema 11 stepper motor and 150mm length Tr5.56x4.8768 linear screw. Electrical Specification Manufacturer Part Number: 11N13S0754QE-150RS Motor Type: Non-captive Linear Ste..

This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.3A at 12.0V, with holding torque 3Ncm (4.25oz.in) Electrical Specification Manufacturer Part Number: 8HS15-0304S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 3Ncm(4.25oz.in) Rated Cu..

This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A at 6.0V, with holding torque 4Ncm (5.7oz.in). Electrical Specification Manufacturer Part Number: 8HS15-0604S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 4Ncm(5.7oz.in) Rated C..

This dual shaft nema 8 stepper motors with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A at 6.0V, with holding torque 4Ncm (5.7oz.in). A rear shaft is available. Electrical Specification Manufacturer Part Number: 8HS15-0604D Motor Type: Bipolar Stepper Step Angle: 1.8 deg ..

Electrical Specification Manufacturer Part Number: 57BLR90-36-01 Phase: 3 Poles: 4 Rated Voltage: 36V Rated Speed: 4000±10%RPM Rated Torque: 0.33Nm(46.73oz.in) Rated Current: 5±10%A Rated Power: 138W Insulation Class: Class B Insulation Resistance: 100MΩ Min @500VDC Dielectric Strength Test: 500VAC for 1 ..

This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.31.0A at 12V, with holding torque 15.8Ncm (22.4oz.in). Electrical Specification Manufacturer Part Number: 17HS13-0316S Motor Type: Unipolar Stepper Step Angle: 1.8 deg Holding Torque: ..

Electrical Specification Manufacturer Part Number: 23HS26-2004H Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 1.45 Nm(205.38oz.in) Rated Current/phase: 2.0 A Phase Resistance: 2.15 ohms± 10% Inductance: 6.9 mH ± 20%(1KHz) Physical Specification Frame Size: 57 x 57 mm Body Length: 65..

This closed loop nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted. Electrical Specification Manufacturer Par..

This Nema 34 stepper motor with IP65 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP65 stepper motor can be totally protected against dust, and can be protected against low pressure jets if water from all directions - limited ingress permitted. Electrical Specification Manufacturer Part Number: 34..

This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A at 12V, with holding torque 32Ncm (45.3oz.in), A rear shaft is available. Electrical Specification Manufacturer Part Number: 17HM19-0406D Motor Type: Unipolar Stepper Step Angle: 0.9 d..

This Nema 34 stepper motor with IP67 waterproof ratings and 4.5Nm(637.38oz.in), that meaning this IP67 stepper motor can be totally protected against dust, and can be protected against the effects of temporary immersion between 15cm and 1m and duration of test 30 minutes. Electrical Specification Manufacturer Par..

This is a dual-shaft and low-speed motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels. Electrical Specification Manufacturer Part Number: 23HM20-0384D Motor Type: Bipolar Stepper Step Angle: 0..