Stepper Motor Driver 2.4-7.2A Max 80VAC or 110VDC MA860H

Stepper Motor Driver 2.4-7.2A Max 80VAC or 110VDC

$52.68

(10000)

Stepper Motor Driver 2.4-7.2A Max 80VAC or 110VDC

     0 reviews  |  Write a review
SKU: MA860H
$52.68

Bulk quantity price break:

Qty 3 10 30 100
Price $51.18 $49.67 $48.17 $46.66
Save 3% 6% 9% 11%
Availability: 10000
askquestion

The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Key Features

  • High performance, cost-effective
  • Supply voltage up to 80VAC or +110VDC
  • Output current up to 7.2A
  • Self-adjustment technology
  • Pure-sinusoidal current control technology
  • Pulse input frequency up to 300 KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • Short-voltage, over-voltage, over-current and short-cicuit protection

Electrical Specifications:

  • Output Peak Current: 2.6~7.2A (5.1 RMS)
  • Input Voltage: +24~80VAC or +36~110VDC
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~300kHz
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 50℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature:70℃ MA
  • Vibration: 5.9m/s2 Max
  • Storage Temperature:70℃ MAX
  • Weight: Approx.650g (22.93oz)

Resources

Stepper Driver Specification
Frame Size(mm) 151x97x65
Driving Voltage(V) 36 - 110VDC / 24 - 80VAC
Output Current(A) 2.6 - 7.2
Microstep(Steps/rev.) 400 - 51200, 1000 - 50000
Max. Pulse Input(kHZ) 300
Pulse Width(μs) 1.5
Physical Specification
Weight(g) 650

Write a review

Note: HTML is not translated!

Do you have any questions about Stepper Motor Driver 2.4-7.2A Max 80VAC or 110VDC?