Leadshine ND556 Microstepping Driver 20~50VDC with 1.4~5.6A ND556

Leadshine ND556 Microstepping Driver 20~50VDC with 1.4~5.6A

$74.15

(9991)

Leadshine ND556 Microstepping Driver 20~50VDC with 1.4~5.6A

     0 reviews  |  Write a review
SKU: ND556
$74.15

Bulk quantity price break:

Qty 3 10 30 100
Price $70.44 $66.73 $63.03 $59.32
Save 5% 10% 15% 20%
Availability: 9991
askquestion

This driver is brand Leadshine (The most famous stepper driver company in China), and STEPPERONLINE is the biggest distributor of Leadshine in China.

This is a high performance stepper drive implemented with Leadshine’s advanced pure-sinusoidal current control technology. It can be used to drive 2-phase and 4-phase motors(from Nema 17-Nema 43 size) smoothly with very low heat and noise and makes it a servo-like performance. It works with 20-50VDC voltage and can provide max 5.6A peak current. You can set the DIP switches to get the current and microsteps you need.

Key Features:

  • Pure-sinusoidal precise current control technology
  • Extremely low motor noise
  • Both driver and motor are low heating
  • High performance, low cost
  • Supply voltage up to +50VDC
  • Peak current up to 5.6A (4.0A RMS)
  • Optically isolated differential inputs
  • Pulse frequency up to 400 KHz
  • Automatic idle-current reduction
  • 15 selectable resolutions in decimal and binary
  • Suitable for 2-phase and 4-phase motors
  • DIP switch current setting with 8 different value
  • Over-voltage and short-circuit protection
  • Small size (118x75.5x34mm)

Electrical Specifications:

  • Output Peak Current: 1.4~5.6A (4 RMS)
  • Input Voltage: +20~50VDC
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~400kHz
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 50℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 70℃ MAX
  • Vibration:5.9m/s2 Max
  • Storage Temperature: -20℃ - 65℃
  • Weight: Approx.280g (9.9oz)

Resources

Stepper Driver Specification
Frame Size(mm) 118x75.5x34
Driving Voltage(V) 20 - 50
Output Current(A) 1.4 - 5.6
Microstep(Steps/rev.) 400 - 25600
Max. Pulse Input(kHZ) 400
Pulse Width(μs) 1.2
Physical Specification
Weight(g) 280

Write a review

Note: HTML is not translated!

Do you have any questions about Leadshine ND556 Microstepping Driver 20~50VDC with 1.4~5.6A?

Get 3% OFF on your purchase,
Just need Share or Tweet us!