Leadshine MA860 Analog Stepper Driver 18~60VAC / 24~80VDC with 1.8~7.2A MA860

Leadshine MA860 Analog Stepper Driver 18~60VAC / 24~80VDC with 1.8~7.2A

$71.06

(9994)

Leadshine MA860 Analog Stepper Driver 18~60VAC / 24~80VDC with 1.8~7.2A

     3 reviews  |  Write a review
SKU: MA860
$71.06

Bulk quantity price break:

Qty 3 10 30 100
Price $67.51 $63.95 $60.40 $56.85
Save 5% 10% 15% 20%
Availability: 9994
askquestion

This driver is brand Leadshine (The most famous stepper driver company in China), and STEPPERONLINE is the biggest distributor of Leadshine in China.

This is a high performance stepper drive implemented with Leadshine’s advanced pure-sinusoidal current control technology. It can be used to drive 2-phase and 4-phase motors(from Nema 17-Nema 43 size) smoothly with less heat and noise. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. It works with 24-80VDC voltage and can provide max 7.2A peak current. You can set the DIP switches to get the current and microsteps you need.

Key Features:

  • High performance, cost-effective
  • Supply voltage up to 60VAC or +80VDC
  • Output current up to 7.2A
  • Self-adjustment technology
  • Pure-sinusoidal current control technology
  • Pulse input frequency up to 300 KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • 15 selectable resolutions in decimal and binary, up to 51,200 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Short-voltage, over-voltage, over-current and short-circuit protection

Electrical Specifications:

  • Output Peak Current: 1.8~7.2A (5.1 RMS)
  • Input Voltage: +18~60VAC / 24~80VDC
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~300kHz
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 50℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 70℃ MAX
  • Vibration:5.9m/s2 Max
  • Storage Temperature: -20℃ - 65℃
  • Weight: Approx.570g (20.1oz)

Resources

Stepper Driver Specification
Frame Size(mm) 151x97x48
Driving Voltage(V) 18 - 60VAC / 24 - 80VDC
Output Current(A) 1.8 - 7.2
Microstep(Steps/rev.) 400 - 51200
Max. Pulse Input(kHZ) 300
Pulse Width(μs) 1.5
Physical Specification
Weight(g) 570

Write a review

Note: HTML is not translated!

Do you have any questions about Leadshine MA860 Analog Stepper Driver 18~60VAC / 24~80VDC with 1.8~7.2A?

Get 3% OFF on your purchase,
Just need Share or Tweet us!