Leadshine M860 Analog Stepper Driver 24~80VDC with 1.8~7.2A M860

Leadshine M860 Analog Stepper Driver 24~80VDC with 1.8~7.2A

$57.93

(10000)

Leadshine M860 Analog Stepper Driver 24~80VDC with 1.8~7.2A

     0 reviews  |  Write a review
SKU: M860
$57.93

Bulk quantity price break:

Qty 3 10 30 100
Price $56.00 $54.07 $52.14 $50.21
Save 3% 7% 10% 13%
Availability: 10000
askquestion

This driver is brand Leadshine (The most famous stepper driver company in China), and STEPPERONLINE is the biggest distributor of Leadshine in China.

The Leadshine M860 is a high performance microstepping driver based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the Drives in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Key Features:

  • High performance, cost-effective
  • Supply voltage up to +80VDC
  • Output current up to 7.2A
  • Self-adjustment technology
  • Pure-sinusoidal current control technology
  • Pulse input frequency up to 300 KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Short-voltage, over-voltage, over-current and short-circuit protection

Electrical Specifications:

  • Output Peak Current: 1.8~7.2A (5.1 RMS)
  • Input Voltage: +24~80VDC
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~300kHz
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 50℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 70℃ MAX
  • Vibration:5.9m/s2 Max
  • Storage Temperature: -20℃ - 65℃
  • Weight: Approx.570g (20.1oz)

Resources

Stepper Driver Specification
Frame Size(mm) 151x97x48
Driving Voltage(V) 24 - 80
Output Current(A) 1.8 - 7.2
Microstep(Steps/rev.) 400 - 51200, 1000 - 40000
Max. Pulse Input(kHZ) 300
Pulse Width(μs) 1.5
Physical Specification
Weight(g) 570

Write a review

Note: HTML is not translated!

Do you have any questions about Leadshine M860 Analog Stepper Driver 24~80VDC with 1.8~7.2A?

People Also Bought