Leadshine M542 Stepper Motor Drive 20-50 VDC with 1.0-4.2A M542

Leadshine M542 Stepper Motor Drive 20-50 VDC with 1.0-4.2A

$39.51

(10000)

Leadshine M542 Stepper Motor Drive 20-50 VDC with 1.0-4.2A

     0 reviews  |  Write a review
SKU: M542
$39.51

Bulk quantity price break:

Qty 3 10 30 100
Price $38.23 $36.96 $35.68 $34.41
Save 3% 6% 10% 13%
Availability: 10000
askquestion

This driver is brand Leadshine (The most famous stepper driver company in China), and STEPPERONLINE is the biggest distributor of Leadshine in China.

The Leadshine M542 is an economical microstepping driver based on patented technology of Leadshine. It is suitable for driving 2-phase and 4-phase hybrid stepping motors. By using the advanced bipolar constant-current chopping technique, it can output more speed and torque from the same motor, compared with traditional drivers, such as L/R drivers. Its 3-state current control technology allows coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is achieved.

Key Features

  • Low cost and good high-speed torque
  • Optically isolated input signals
  • Supply voltage up to +50VDC
  • Output current up to 4.2A
  • Pulse frequency up to 300 KHz
  • Automatic idle-current reduction
  • 3-state current control technology
  • DIP switch current setting with 8 different values
  • CW/CCW mode available (optional)
  • 15 selectable resolutions in decimal and binary, up to 25,600 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • DIP switch current setting with 8 different values
  • Short-voltage, over-voltage, over-current protections
  • Small size (118x75.5x33mm)

Electrical Specifications:

  • Output Peak Current: 1.0~4.2A (3.0 RMS)
  • Input Voltage: +20~50VDC (Typical 36VDC)
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~300kHz
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 50℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature:70℃ MAX
  • Vibration: 5.9m/s2 Max
  • Storage Temperature: -20℃ - 65℃
  • Weight: Approx.280g (9.9oz)

Resources

Stepper Driver Specification
Frame Size(mm) 118x75.5x33
Driving Voltage(V) 20 - 50
Output Current(A) 1 - 4.2
Microstep(Steps/rev.) 400 - 25600, 1000 - 25000
Max. Pulse Input(kHZ) 300
Pulse Width(μs) 1.5
Physical Specification
Weight(g) 280

Write a review

Note: HTML is not translated!

Do you have any questions about Leadshine M542 Stepper Motor Drive 20-50 VDC with 1.0-4.2A?