Leadshine DM2282 Digital Stepper Motor Drive 150-230 VAC with 0.5-8.2A DM2282

Driver - Leadshine DM2282 Digital Stepper Motor Drive 150-230 VAC with 0.5-8.2A

$139.03

(10000)

Driver - Leadshine DM2282 Digital Stepper Motor Drive 150-230 VAC with 0.5-8.2A

     0 reviews  |  Write a review
SKU: DM2282
$139.03

Bulk quantity price break:

Qty 3 10 30 100
Price $134.40 $129.76 $125.13 $120.49
Save 3% 7% 10% 13%
Availability: 10000
askquestion

The DM2282 is a high voltage, versatility fully digital stepping driver based on a DSP with advanced control algorithm. The DM2282 is the next generation of digital stepping motor controls. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor auto-identification and parameter auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers in the markets. Its unique features make the DM2282 an ideal solution for applications that require low-speed smoothness.

Key Features

  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movemen
  • Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Microstep resolutions programmable, from full-step to 102,400. It can also be set via DIP switches.
  • Soft-start with no "jump" when powered on
  • Supply voltage up to +230 VAC
  • Output current programmable, from 0.5A to 8.2A. It can also be set via DIP switches.
  • Maximum frequency: 200KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction (Reduction rate can be software configured)
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Over-voltage, Under-voltage, over-current, phase-error protections

Electrical Specifications:

  • Output Peak Current: 0.5~8.2A
  • Input Voltage: +150~230VAC
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~200kHz
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 50℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 70℃ MAX
  • Storage Temperature: -20℃ - 65℃
  • Weight: Approx.1.3kg (45.86oz)

Resources

Stepper Driver Specification
Frame Size(mm) 200x137x81
Driving Voltage(V) 150 - 230VAC
Output Current(A) 0.5 - 8.2
Microstep(Steps/rev.) 200 - 102400, 1000 - 25000
Max. Pulse Input(kHZ) 200
Pulse Width(μs) 2.5
Physical Specification
Weight(g) 1300

Write a review

Note: HTML is not translated!

Do you have any questions about Driver - Leadshine DM2282 Digital Stepper Motor Drive 150-230 VAC with 0.5-8.2A?