Leadshine AM882 Digital Stepper Driver With Stall Detection Max 80 VDC / 8.2A AM882

Leadshine AM882 Digital Stepper Driver With Stall Detection Max 80 VDC / 8.2A

$88.05

(9995)

Leadshine AM882 Digital Stepper Driver With Stall Detection Max 80 VDC / 8.2A

     2 reviews  |  Write a review
SKU: AM882
$88.05

Bulk quantity price break:

Qty 3 10 30 100
Price $83.65 $79.25 $74.84 $70.44
Save 5% 10% 15% 20%
Availability: 9995
askquestion

This driver is brand Leadshine (The most famous stepper driver company in China), and STEPPERONLINE is the biggest distributor of Leadshine in China.

It is a versatility fully digital stepper drive implemented with Leadshine’s advanced control technology. It is can be used to drive 2-phase and 4-phase motors(from Nema 17-Nema 34 size) smoothly with less heat and noise and it is the next generation of digital stepping motor controls. It works with 20-80VDC voltage and can provide max 8.2A peak current. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. You can set the DIP switches to get the current and microsteps you need.

Key Features:

  • Sensorless tall detection, eliminates cost of feedback device and cabling(>300RPM)
  • Anti-Resonance, provides optimum torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration technology, offers optimum responses with different motors
  • Built-in auto-configuration parameters for 16 Leadshine stepping motor
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance
  • Microstep resolutions programmable, from full-step to 102,400 steps/rev
  • Supply voltage up to +80 VDC, Output current programmable, from 0.1A to 8.2A
  • Pulse input frequency up to 200 KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction and software configured reduction rate
  • Suitable for 2-phase and 4-phase motors
  • Support PULSE/DIRECTION mode
  • Over-voltage, over-current, phase-error protections

Electrical Specifications:

  • Output Peak Current: 0.1~8.2A (5.86 RMS)
  • Input Voltage: +20~80VDC
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~200kHz
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 50℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 70℃ MAX
  • Vibration:5.9m/s2 Max
  • Storage Temperature: -20℃ - 65℃
  • Weight: Approx.570g (20oz)

Resources

Stepper Driver Specification
Frame Size(mm) 151x97x52
Driving Voltage(V) 20 - 80
Output Current(A) 0.1 - 8.2
Microstep(Steps/rev.) 200 - 102400
Max. Pulse Input(kHZ) 200
Pulse Width(μs) 1.2
Physical Specification
Weight(g) 570

Write a review

Note: HTML is not translated!

Do you have any questions about Leadshine AM882 Digital Stepper Driver With Stall Detection Max 80 VDC / 8.2A?

Get 3% OFF on your purchase,
Just need Share or Tweet us!