Leadshine 3ND883 3 Phase Analog Stepper Drive Max 80 VDC / 8.3A 3ND883

Leadshine 3ND883 3 Phase Analog Stepper Drive Max 80 VDC / 8.3A

$92.69

(9997)

Leadshine 3ND883 3 Phase Analog Stepper Drive Max 80 VDC / 8.3A

     2 reviews  |  Write a review
SKU: 3ND883
$92.69

Bulk quantity price break:

Qty 3 10 30 100
Price $88.05 $83.42 $78.78 $74.15
Save 5% 10% 15% 20%
Availability: 9997
askquestion

This driver is brand Leadshine (The most famous stepper driver company in China), and STEPPERONLINE is the biggest distributor of Leadshine in China.

This is a high resolution stepper drive implemented with Leadshine’s advanced pure-sinusoidal current control technology. It can be used to drive 3-phase motors(from Nema 17-Nema 34 size) smoothly with very low heat and noise which can be reduced by 15-30%. It works with 24-80VDC voltage and can provide max 8.3A peak current. You can set the DIP switches or software to get the current and microsteps you need.

Key Features:

  • High performance, low noise and lost cost
  • Low driver heating and low motor heating
  • Supply voltage up to 80 VDC
  • Output current up to 8.3A (RMS 5.9A)
  • Input signal TTL compatible
  • Automatic idle-current reduction
  • Suitable for 3-phase stepping motors, including 3 lead and 6 lead motors
  • Optically isolated differential input signals, pulse frequency up to 300 KHz
  • 16 selectable resolutions up to 25600 steps/rev
  • DIP switch current setting with 8 different values
  • PUL/DIR & CW/CCW modes optional
  • Over-voltage, short-voltage, over-current and short-circuit protection
  • Small size for easy mounting

Electrical Specifications:

  • Output Peak Current: 2.1~8.3A (5.9 RMS)
  • Input Voltage: +24~80VDC
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~300kHz
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 50℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 70℃ MAX
  • Vibration: 5.9m/s2 Max
  • Storage Temperature: -20℃ - 65℃
  • Weight: Approx.550g (19.4oz)

Resources

Stepper Driver Specification
Frame Size(mm) 151x97x48
Driving Voltage(V) 24 - 80
Output Current(A) 2.1 - 8.3
Microstep(Steps/rev.) 200 - 25600
Max. Pulse Input(kHZ) 300
Pulse Width(μs) 1.5
Physical Specification
Weight(g) 550

Write a review

Note: HTML is not translated!

Do you have any questions about Leadshine 3ND883 3 Phase Analog Stepper Drive Max 80 VDC / 8.3A?

Get 3% OFF on your purchase,
Just need Share or Tweet us!