Leadshine 3ND583 3 Phase Analog Stepper Drive Max 50 VDC / 8.3A 3ND583

Leadshine 3ND583 3 Phase Analog Stepper Drive Max 50 VDC / 8.3A

$53.29

(10000)

Leadshine 3ND583 3 Phase Analog Stepper Drive Max 50 VDC / 8.3A

     0 reviews  |  Write a review
SKU: 3ND583
$53.29

Bulk quantity price break:

Qty 3 10 30 100
Price $51.52 $49.74 $47.97 $46.19
Save 3% 7% 10% 13%
Availability: 10000
askquestion

This driver is brand Leadshine (The most famous stepper driver company in China), and STEPPERONLINE is the biggest distributor of Leadshine in China.

The Leadshine 3ND583 is a high resolution 3-phase microstepping driver based on precision current control technology. It’s suitable for driving 3-phase hybrid stepping motors from NEMA size 17 to 34. By using the advanced pure-sinusoidal current control technology, both the noise and vibration of the stepping motor have been greatly reduced, which makes the stepping motors offer servo-like performances. Compared to the 3MD560, it’s lighter and smaller, and compared to most of the microstepping drivers in the market, both driver heating and motor heating have been reduced by 15-30%.

Key Features:

  • High performance, low noise and lost cost
  • Low driver heating and low motor heating
  • Supply voltage up to 50 VDC
  • Output current up to 8.3A (RMS 5.9A)
  • Input signal TTL compatible
  • Automatic idle-current reduction
  • Suitable for 3-phase stepping motors, including 3 lead and 6 lead motors
  • Optically isolated differential input signals, pulse frequency up to 300 KHz
  • 8 selectable resolutions up to 10000 steps/rev
  • DIP switch current setting with 16 different values
  • PUL/DIR & CW/CCW modes optional
  • Over-voltage, short-voltage, over-current and short-circuit protection
  • Small size for easy mounting

Electrical Specifications:

  • Output Peak Current: 2.1~8.3A (5.9 RMS)
  • Input Voltage: +20~50VDC
  • Logic Signal Current: 7~16mA (Typical 10mA)
  • Pulse Input Frequency: 0~300kHz
  • Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

  • Cooling: Natural Cooling or Forced cooling
  • Environment: Avoid dust, oil fog and corrosive gases
  • Ambient Temperature: 0℃ - 50℃
  • Humidity: 40%RH-90%RH
  • Operating Temperature: 70℃ MAX
  • Vibration: 5.9m/s2 Max
  • Storage Temperature: -20℃ - 65℃
  • Weight: Approx.280g (9.88oz)

Resources

Stepper Driver Specification
Frame Size(mm) 118x75.5x34
Driving Voltage(V) 20 - 50
Output Current(A) 2.1 - 8.3
Microstep(Steps/rev.) 200 - 10000
Pulse Width(μs) 1.5
Physical Specification
Weight(g) 280

Write a review

Note: HTML is not translated!

Do you have any questions about Leadshine 3ND583 3 Phase Analog Stepper Drive Max 50 VDC / 8.3A?

People Also Bought