Dual Shaft Nema 17 Unipolar 16Ncm (22.7oz.in) 0.95A 4V 42x42x33mm 6 Wires

     0 reviews  |  Write a review
SKU: 17HS13-0956D
$8.30

Bulk quantity price break:

Qty 3 10 30 100
Price $7.32 $6.93 $6.55 $6.16
Save 12% 16% 21% 26%
Availability: 100

Qty

  • Connectors: Molex, Harwin, Tyco/AMP, JST etc.
  • Lead wires & cables: Special lengths, Protective hose
  • Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
  • Winding: Resistance, Inductance, Rated Current, etc.
askquestion

This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws 0.95A at 4.0V, with holding torque 16Ncm (22.7oz.in). A rear shaft is available.

Electrical Specification

  • Manufacturer Part Number: 17HS13-0956D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 16Ncm(22.7oz.in)
  • Rated Current/phase: 0.95A
  • Voltage: 4V
  • Phase Resistance: 4.2ohms
  • Inductance : 2.5mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 42 x 42mm
  • Body Length: 33mm
  • Shaft Diameter: Φ5mm
  • Shaft Length: 20mm
  • D-Cut Length: 15mm
  • Rear Shaft Diameter: Φ5mm
  • Rear Shaft Length: 10mm
  • Number of Leads: 6
  • Lead Length: 500mm
  • Weight: 220g

Connection

A+
O+
A-
B+
O-
B-
BLK
YEL
GRN
RED
WHT
BLU

Resources

Electrical Specification
Bipolar/Unipolar Unipolar
Holding Torque(Ncm) 16
Holding Torque(oz.in) 22.7
Inductance(mH) 2.5
Phase Resistance(ohm) 4.2
Rated Current(A) 0.95
Step Angle(°) 1.8
Physical Specification
Body Length(mm) 33
Frame Size(mm) 42 x 42
Single Shaft/Dual Shaft Dual Shaft
Shaft Type D-Cut
Shaft Diameter(mm) 5
Shaft Length(mm) 20
No. of Lead 6
Lead Length(mm) 500
Weight(g) 220

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about Dual Shaft Nema 17 Unipolar 16Ncm (22.7oz.in) 0.95A 4V 42x42x33mm 6 Wires?

Captcha