- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
Dual Shaft Nema 34 Unipolar 1.8deg 2.2Nm (312oz.in) 2A 86x86x66mm 6 Wires
5
1
SKU: 34HS26-2006D
$42.12
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $38.45 | $36.62 | $34.79 | $32.96 |
| Save | 9% | 13% | 17% | 22% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm (312oz.in). A rear shaft can mount encoder, hand wheel or equals.
Electrical Specification
- Manufacturer Part Number: 34HS26-2006D
- Motor Type: Unipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 2.2Nm(312oz.in)
- Rated Current/phase: 2.0A
- Voltage: 4.4V
- Phase Resistance: 2.2ohms
- Inductance: 7.0mH ± 20%(1KHz)
Physical Specification
- Frame Size: 86 x 86mm
- Body Length: 66mm
- Shaft Diameter: Φ14mm
- Front Shaft Length: 37mm
- D-cut Length: 25mm
- Rear Shaft Length: 34mm
- Number of Leads: 6
- Lead Length: 300mm
- Weight: 1.7kg
Connection
A+ |
O+ |
A- |
B+ |
O- |
B- |
BLK |
YEL |
GRN |
RED |
WHT |
BLU |
Resources
- Full Datasheet: 34HS26-2006D.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Unipolar |
| Holding Torque(Ncm) | 220 |
| Holding Torque(oz.in) | 312 |
| Inductance(mH) | 7 |
| Phase Resistance(ohm) | 2.2 |
| Rated Current(A) | 2 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 66 |
| Frame Size(mm) | 86 x 86 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 14 |
| Shaft Length(mm) | 37 |
| No. of Lead | 6 |
| Lead Length(mm) | 300 |
| Weight(g) | 1700 |
