- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Dual Shaft Nema 17 Bipolar 1.8deg 26Ncm (36.8oz.in) 0.4A 12V 42x34mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 26Ncm (36.8oz.in) 0.4A 12V 42x34mm 4 Wires
Dual Shaft Nema 17 Bipolar 1.8deg 26Ncm (36.8oz.in) 0.4A 12V 42x34mm 4 Wires
4
3
SKU: 17HS13-0404D
$9.52
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $8.69 | $8.28 | $7.87 | $7.45 |
| Save | 9% | 13% | 17% | 22% |
Availability: 127
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A at 12V, with holding torque 26Ncm (36.8oz.in). A rear shaft is available.
Electrical Specification
- Manufacturer Part Number: 17HS13-0404D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 26Ncm(36.8oz.in)
- Rated Current/phase: 0.4A
- Voltage: 12V
- Phase Resistance: 30ohms
- Inductance: 37mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 34mm
- Shaft Diameter: Φ5mm
- Front Shaft Length: 20mm
- Rear Shaft Length : 10mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 400mm
- Weight: 230g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Resources
- Full Datasheet: 17HS13-0404D.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 26 |
| Holding Torque(oz.in) | 36.8 |
| Inductance(mH) | 37 |
| Phase Resistance(ohm) | 30 |
| Rated Current(A) | 0.4 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 34 |
| Frame Size(mm) | 42 x 42 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| No. of Lead | 4 |
| Lead Length(mm) | 500 |
| Weight(g) | 280 |
