- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Pancake Nema 11 Bipolar 1.8deg 1Ncm (1.4164oz.in) 0.5A 28x28x9.5mm 4 Wires
Pancake Nema 11 Bipolar 1.8deg 1Ncm (1.4164oz.in) 0.5A 28x28x9.5mm 4 Wires
SKU: 11HS04-0504S
$21.89
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $21.02 | $20.14 | $19.27 | $18.39 |
| Save | 4% | 8% | 12% | 16% |
Availability: 30
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This bipolar pancake Nema 11 stepper motor with step angle 1.8deg and size 28x28x9.5 mm. It has 4 wires, each phase draws 0.5 A, with holding torque 1 Ncm (1.4164 oz.in).
Electrical Specification
- Manufacturer Part Number: 11HS04-0504S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 1Ncm (1.4164oz.in)
- Rated Current/phase: 0.5 A
- Phase Resistance: 4 ohms
- Inductance: 0.8 mH ± 20%(1KHz)
Physical Specification
- Frame Size: 28 x 28 mm
- Body Length: 9.5 mm
- Shaft Diameter: Φ3 mm
- Shaft Length: 10 mm
- Number of Leads: 4
- Lead Length: 300 mm
- Weight: 28 g
Connection
A+ |
A- |
B+ |
B- |
Red |
Blue |
Orange |
Yellow |
Resources
- Full Datasheet: 11HS04-0504S.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 1 |
| Holding Torque(oz.in) | 1.416 |
| Inductance(mH) | 0.8 |
| Phase Resistance(ohm) | 4 |
| Rated Current(A) | 0.5 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 9.5 |
| Frame Size(mm) | 28 x 28 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | O |
| Shaft Diameter(mm) | 3 |
| Shaft Length(mm) | 10 |
| No. of Lead | 4 |
| Lead Length(mm) | 300 |