- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
Dual Shaft Nema 34 CNC Stepper Motor 8.5Nm (1204oz.in) 5A 86x114mm
5
6
SKU: 34HS46-5004D
$76.39
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $69.75 | $66.43 | $63.10 | $59.78 |
| Save | 9% | 13% | 17% | 22% |
Availability: 521
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This Nema 34 dual shaft stepper motor with size 86x86x114mm. It has 4 wires, each phase draws 5.0A, with holding torque 8.5Nm (1204oz.in). A rear shaft can mount encoder, hand wheel or equals.
Electrical Specification
- Manufacturer Part Number: 34HS46-5004D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 8.5Nm(1204oz.in)
- Rated Current/phase: 5.0A
- Voltage: 5V
- Phase Resistance: 1.0ohms
- Inductance: 11mH ± 20%(1KHz)
Physical Specification
- Frame Size: 86 x 86mm
- Body Length: 114mm
- Shaft Diameter: Φ14mm
- Front Shaft Length: 37mm
- Rear Shaft Length: 34mm
- D-cut Length: 25mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 3.6kg
Connection
A+ |
A- |
B+ |
B- |
Red |
Green |
Yellow |
Blue |
Resources
- Full Datasheet: 34HS46-5004D.pdf
- Torque Curve: 34HS46-5004D Torque Curve.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 850 |
| Holding Torque(oz.in) | 1204 |
| Inductance(mH) | 11 |
| Phase Resistance(ohm) | 1 |
| Rated Current(A) | 5 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 114 |
| Frame Size(mm) | 86 x 86 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 14 |
| Shaft Length(mm) | 37 |
| No. of Lead | 4 |
| Lead Length(mm) | 300 |
| Weight(g) | 3600 |
