- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 8 Bipolar 1.8deg 3Ncm (4.25oz.in) 0.3A 12V 20x20x38mm 4 Wires
Nema 8 Bipolar 1.8deg 3Ncm (4.25oz.in) 0.3A 12V 20x20x38mm 4 Wires
Nema 8 Bipolar 1.8deg 3Ncm (4.25oz.in) 0.3A 12V 20x20x38mm 4 Wires
5
1
SKU: 8HS15-0304S
$16.88
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $16.03 | $15.19 | $14.35 | $13.50 |
| Save | 5% | 10% | 15% | 20% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This nema 8 stepper motor with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.3A at 12.0V, with holding torque 3Ncm (4.25oz.in)
Electrical Specification
- Manufacturer Part Number: 8HS15-0304S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 3Ncm(4.25oz.in)
- Rated Current/phase: 0.3A
- Voltage: 12V
- Phase Resistance: 40ohms
- Inductance : 18mH ± 20%(1KHz)
Physical Specification
- Frame Size: 20 x 20mm
- Body Length: 38mm
- Shaft Diameter: Φ4mm
- Shaft Length: 20mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 80g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Resources
- Full Datasheet: 8HS15-0304S.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 3 |
| Holding Torque(oz.in) | 4.25 |
| Inductance(mH) | 18 |
| Phase Resistance(ohm) | 40 |
| Rated Current(A) | 0.3 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 38 |
| Frame Size(mm) | 20 x 20 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 4 |
| Shaft Length(mm) | 20 |
| No. of Lead | 4 |
| Lead Length(mm) | 300 |
| Weight(g) | 80 |
