- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 23 Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires 
Nema 23 Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23 Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires 5 1
SKU: 23HR11-0504S
$12.59
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $11.52 | $10.98 | $10.44 | $9.91 |
| Save | 8% | 13% | 17% | 21% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This bipolar Nema 23 stepper motor with step angle 1.8deg and size Φ57x28mm. It has 4 wires, each phase draws 0.5A, with holding torque 0.34Nm (48.61oz.in).
Electrical Specification
- Manufacturer Part Number: 23HR11-0504S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 0.34Nm (48.61oz.in)
- Rated Current/phase: 0.5A
- Voltage: 9.9V
- Phase Resistance: 19.8ohms
- Inductance: 25mH ± 20%(1KHz)
Physical Specification
- Frame Size: Φ57mm
- Body Length: 28mm
- Shaft Diameter: Φ5mm
- Shaft Length: 13.5mm
- D-cut Length: 10mm
- Number of Leads: 4
- Lead Length: 310mm
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
- Full Datasheet: 23HR11-0504S.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 34 |
| Holding Torque(oz.in) | 48.15 |
| Inductance(mH) | 25 |
| Phase Resistance(ohm) | 19.8 |
| Rated Current(A) | 0.5 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 28 |
| Frame Size(mm) | Φ57 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 13.5 |
| No. of Lead | 4 |
| Lead Length(mm) | 310 |
