- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 23 Bipolar 1.8deg 0.6Nm (85oz.in) 0.88A 6.6V 57x57x41mm 4 Wires
Nema 23 Bipolar 1.8deg 0.6Nm (85oz.in) 0.88A 6.6V 57x57x41mm 4 Wires
Nema 23 Bipolar 1.8deg 0.6Nm (85oz.in) 0.88A 6.6V 57x57x41mm 4 Wires 5 2
SKU: 23HS16-0884S
$15.38
Bulk quantity price break:
Qty | 5 | 10 | 50 | 100 |
---|---|---|---|---|
Price | $14.04 | $13.38 | $12.71 | $12.04 |
Save | 9% | 13% | 17% | 22% |
Availability: 107
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 0.88A, with holding torque 0.6Nm (85oz.in).
Electrical Specification
- Manufacturer Part Number: 23HS16-0884S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 0.6Nm(85oz.in)
- Rated Current/phase: 0.88A
- Voltage: 6.6V
- Phase Resistance: 7.5ohms
- Inductance: 21.7mH ± 20%(1KHz)
Physical Specification
- Frame Size: 57 x 57mm
- Body Length: 42mm
- Shaft Diameter: Φ6.35mm
- Shaft Length: 20.6mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 500g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
- Full Datasheet: 23HS16-0884S.pdf
Electrical Specification | |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 60 |
Holding Torque(oz.in) | 85 |
Inductance(mH) | 21.7 |
Phase Resistance(ohm) | 7.5 |
Rated Current(A) | 0.88 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 42 |
Frame Size(mm) | 57 x 57 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 6.35 |
Shaft Length(mm) | 20.6 |
No. of Lead | 4 |
Lead Length(mm) | 500 |
Weight(g) | 500 |