- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
Dual Shaft Nema 23 Bipolar 1.8deg 0.55Nm (78oz.in) 2.8A 2V 57x57x41mm 4 Wires
5
1
SKU: 23HS16-2804D
$15.25
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $13.95 | $13.30 | $12.65 | $12.00 |
| Save | 9% | 13% | 17% | 21% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm (78oz.in), a rear shaft is made for encoder or equals.
Electrical Specification
- Manufacturer Part Number: 23HS16-2804D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 0.55Nm(78oz.in)
- Rated Current/phase: 2.8A
- Voltage: 2V
- Phase Resistance: 0.7ohms
- Inductance: 1.4mH ± 20%(1KHz)
Physical Specification
- Frame Size: 57 x 57mm
- Body Length: 41mm
- Shaft Diameter: Φ6.35mm
- Shaft Length: 19.05mm
- D-cut Length: 15mm
- Rear Shaft Length : 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 470g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Resources
- Full Datasheet: 23HS16-2804D.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 55 |
| Holding Torque(oz.in) | 78 |
| Inductance(mH) | 1.4 |
| Phase Resistance(ohm) | 0.7 |
| Rated Current(A) | 2.8 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 41 |
| Frame Size(mm) | 57 x 57 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 6.35 |
| Shaft Length(mm) | 19.05 |
| No. of Lead | 4 |
| Lead Length(mm) | 500 |
| Weight(g) | 500 |
