Menu
Your Cart

Nema 23 Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires

Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23  Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
Nema 23 Bipolar 1.8deg 34Ncm(48.61oz.in) 0.5A 9.9V 57*28mm 4wires
$14.73
5 + $14.14
10 + $13.55
50 + $12.96
100 + $12.37
  • Model: 23HR11-0504S
  • Stock Status: 100
  • SKU: 23HR11-0504S
This product has a minimum quantity of 50

This bipolar Nema 23 stepper motor with step angle 1.8deg and size Φ57x28mm. It has 4 wires, each phase draws 0.5A, with holding torque 0.34Nm (48.61oz.in).

Electrical Specification

  • Manufacturer Part Number: 23HR11-0504S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 0.34Nm (48.61oz.in)
  • Rated Current/phase: 0.5A
  • Voltage: 9.9V
  • Phase Resistance: 19.8ohms
  • Inductance: 25mH ± 20%(1KHz)

Physical Specification

  • Frame Size: Φ57mm
  • Body Length: 28mm
  • Shaft Diameter: Φ5mm
  • Shaft Length: 13.5mm
  • D-cut Length: 10mm
  • Number of Leads: 4
  • Lead Length: 310mm

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Inductance(mH) 25
Phase Resistance(ohm) 19.8
Rated Current(A) 0.5
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 34
Holding Torque(oz.in) 48.15
Physical Specification
Frame Size(mm) Nema 23 (57 x 57)
Body Length(mm) 28
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 5
Shaft Length(mm) 13.5
No. of Lead 4
Lead Length(mm) 310

Write a review

Note: HTML is not translated!
Bad Good
This is a dual-shaft and low-speed motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end ca..
$19.97
This nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A at 2.8V, with holding torque 45Ncm (63.7..
$9.48
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 4 wires, each phase draws current 0.67A, with holding torque 22...
$7.71
This bipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x76mm. It has 4 wires, each phase draws 4.00A, with holding torque 3.6N.m (509..
$35.04
Electrical Specification Manufacturer Part Number: 14HS11-1004D-PG19 Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque without Ge..
$32.80
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.