The Nema17 stepper motor is a stepper motor with an end face size of 1.7 inches x 1.7 inches. Available in single and dual shaft, 1.8° step angle and 0.9° step angle, round and cut shafts, and can be customized. The driving voltage is 12-24V. The maximum speed can be as high as 2000 rpm. Widely used in 3D printers, engraving machines, film cutting machines and other occasions.

Sort By:
Show:

Nema 17 - 42 x 42mm

Nema 17 Bipolar 1.8deg 79Ncm (111.896oz.in) 2.3A 42x42x67mm 4 Wires

SKU: 17HS26-2304S
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x67 mm. It has 4 wires, each phase draws 2.3 A, with holding torque 79 Ncm (111.896 oz.in). Electrical Specification Manufacturer Part Number: 17HS26-..
$23.94 As low as : $20.11

Nema 17 Bipolar 1.8deg 13Ncm (18.4oz.in) 1A 3.5V 42x42x20mm 4 Wires

SKU: 17HS08-1004S3
This nema 17 stepper motor with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws 1A at 3.5V, with holding torque 13Ncm (18.4oz.in). Electrical Specification Manufacturer Part Number: 17HS08-1004S..
$7.72 As low as : $6.18
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.85A 5.4V 42x42x39mm 4 Wires
-18%

Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.85A 5.4V 42x42x39mm 4 Wires

SKU: 17HS15-0854S-C1
This nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws 0.85A at 5.4V, with holding torque 36Ncm (51oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0854..
$8.65 $7.05 As low as : $6.92
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.85A 5.4V 42x42x39mm 4 Wires with a connector
-18%

Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.85A 5.4V 42x42x39mm 4 Wires with a connector

SKU: 17HS15-0854S-C2
Electrical Specification Manufacturer Part Number: 17HS15-0854S-C2 Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 36Ncm(51oz.in) Rated Current/phase: 0.85A Voltage: 5.4V Phase Resistance: 6.3ohms Indu..
$8.65 $7.05 As low as : $6.92

Nema 17 Bipolar 1.8deg 40Ncm (56.6oz.in) 0.4A 12V 42x42x40mm 4 Wires

SKU: 17HS15-0404S-C1
This nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 0.4A at 12V, with holding torque 40Ncm (56.6oz.in). Electrical Specification Manufacturer Part Number: 17HS15-0404S-..
$9.95 As low as : $7.79

Nema 17 Unipolar 1.8deg 26Ncm (36.8oz.in) 1.2A 4V 42x42x39mm 6 Wires

SKU: 17HS15-1206S
This nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 6 wires, each phase draws 1.2A at 4V, with holding torque 26Ncm (36.8oz.in). Electrical Specification Manufacturer Part Number: 17HS15-1206S ..
$9.95 As low as : $7.79
Show:
Showing 41 to 58 of 58 (3 Pages)
  • Ship from
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
  • Frame Size(mm)
  • Step Angle(°)
  • Holding Torque(Ncm)
  • Holding Torque(oz.in)
  • Bipolar/Unipolar
  • Rated Current(A)
  • Body Length(mm)
  • Single Shaft/Dual Shaft
  • Shaft Type
  • Shaft Diameter(mm)
  • Shaft Length(mm)
  • Phase Resistance(ohm)
  • Inductance(mH)
  • No. of Lead