The Nema17 stepper motor is a stepper motor with an end face size of 1.7 inches x 1.7 inches. Available in single and dual shaft, 1.8° step angle and 0.9° step angle, round and cut shafts, and can be customized. The driving voltage is 12-24V. The maximum speed can be as high as 2000 rpm. Widely used in 3D printers, engraving machines, film cutting machines and other occasions.

Sort By:
Show:

Nema 17 - 42 x 42mm

Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm (62.48oz.in) 1.68A 2.8V 42x42x48mm 4 Wires

SKU: 17HM19-1684D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A at 2.8V, with holding torque 44Ncm (62.48oz.in). Electrical Specification Manufac..
$14.60 As low as : $11.89

Dual Shaft Nema 17 Bipolar 59Ncm (83.78oz.in) 2A 2.8v 42x42x48mm 4 Wires

SKU: 17HS19-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A at 2.8V, with holding torque 59Ncm (83.78oz.in). Electrical Specification Manufactur..
$11.62 As low as : $9.15

Dual Shaft Nema 17 Bipolar 1.8deg 65Ncm (92.3oz.in) 2.10A 3.36V 42x42x60mm 4 Wires

SKU: 17HS24-2104D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x60mm. It has 4 wires, each phase draws 2.10A at 3.36V, with holding torque 65Ncm (92.3oz.in). Electrical Specification Manufac..
$14.52 As low as : $11.43
Show:
Showing 21 to 40 of 58 (3 Pages)
  • Ship from
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
  • Frame Size(mm)
  • Step Angle(°)
  • Holding Torque(Ncm)
  • Holding Torque(oz.in)
  • Bipolar/Unipolar
  • Rated Current(A)
  • Body Length(mm)
  • Single Shaft/Dual Shaft
  • Shaft Type
  • Shaft Diameter(mm)
  • Shaft Length(mm)
  • Phase Resistance(ohm)
  • Inductance(mH)
  • No. of Lead