Menu
Your Cart

Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm

Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm Cable Length 254mm
$8.30
3 + $7.76
10 + $7.30
30 + $7.07
100 + $6.85
  • Model: 17HS16-0284S-C2
  • Stock Status: 550
  • SKU: 17HS16-0284S-C2
This product has a minimum quantity of 50

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws very lower current 0.28A, with holding torque 36Ncm (51oz.in).

Electrical Specification

  • Manufacturer Part Number: 17HS16-0284S-C2
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 36Ncm(51oz.in)
  • Rated Current/phase: 0.28A
  • Voltage: 15.7V
  • Phase Resistance: 56ohms
  • Inductance: 90mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 42 x 42mm
  • Body Length: 40mm
  • Shaft Diameter: Φ5mm
  • Shaft Length: 24mm
  • D-cut Length: 15mm
  • Number of Leads: 4
  • Lead Length: 254mm
  • Weight: 280g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Inductance(mH) 90
Phase Resistance(ohm) 56
Rated Current(A) 0.28
Step Angle(deg.) 1.8
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 36
Holding Torque(oz.in) 51
Physical Specification
IP Rating 40
Frame Size(mm) Nema 17 (42 x 42)
Body Length(mm) 40
Single Shaft/Dual Shaft Single Shaft
Output Shaft Type D-Cut
Shaft Diameter(mm) 5
Shaft Length(mm) 24
No. of Lead 4
Lead Length(mm) 254
Weight(g) 280

Write a review

Note: HTML is not translated!
Bad Good
This dual shaft nema 17 stepper motors with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 2A at 2.2V, with holding torque 45..
$8.30
This nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A at 2.8V, with holding torque 45Ncm (63.7..
$9.48
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 4 wires, each phase draws current 0.67A, with holding torque 22...
$7.71
This bipolar Nema 23 stepper motor with step angle 1.8deg and size Φ57x28mm. It has 4 wires, each phase draws 0.5A, with holding torque 0.34Nm (48.61o..
$14.73
This bipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x76mm. It has 4 wires, each phase draws 4.00A, with holding torque 3.6N.m (509..
$35.04
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.