- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 17 Bipolar 1.8deg 13Ncm (18.4oz.in) 0.7A 2.9V 42x42x25mm 4 Wires
Nema 17 Bipolar 1.8deg 13Ncm (18.4oz.in) 0.7A 2.9V 42x42x25mm 4 Wires
Nema 17 Bipolar 1.8deg 13Ncm (18.4oz.in) 0.7A 2.9V 42x42x25mm 4 Wires
5
15
SKU: 17HS10-0704S
$8.36
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $7.96 | $7.56 | $7.17 | $6.77 |
| Save | 5% | 10% | 14% | 19% |
Availability: 429
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x25mm. It has 4 wires, each phase draws current 0.7A, with holding torque 13Ncm (18.4oz.in).
Electrical Specification
- Manufacturer Part Number: 17HS10-0704S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 13Ncm(18.4oz.in)
- Rated Current/phase: 0.7A
- Voltage: 2.9V
- Phase Resistance: 4.2ohms
- Inductance : 5.5mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 25mm
- Shaft Diameter: Φ5mm
- Shaft Length: 20mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 180g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Resources
- Full Datasheet: 17HS10-0704S.pdf
- Torque Curve: 17HS10-0704S Torque Curve.pdf
| Electrical Specification | |
| Inductance(mH) | 5.5 |
| Phase Resistance(ohm) | 4.2 |
| Rated Current(A) | 0.7 |
| Step Angle(deg.) | 1.8 |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 13 |
| Holding Torque(oz.in) | 18.41 |
| Physical Specification | |
| Frame Size(mm) | Nema 17 (42 x 42) |
| Body Length(mm) | 25 |
| Single Shaft/Dual Shaft | Single Shaft |
| Output Shaft Type | O |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 20 |
| No. of Lead | 4 |
| Lead Length(mm) | 300 |
| Weight(g) | 180 |
