- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 17 Bipolar 0.9deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x42x47mm 4 Wires
Nema 17 Bipolar 0.9deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x42x47mm 4 Wires
SKU: 17HM19-1684S
$15.05
Bulk quantity price break:
Qty | 5 | 10 | 50 | 100 |
---|---|---|---|---|
Price | $13.93 | $13.38 | $12.82 | $12.26 |
Save | 7% | 11% | 15% | 19% |
Availability: 401
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x47mm. It has 4 wires, each phase draws current 1.68A, with holding torque 44Ncm (62.3oz.in).
Electrical Specification
- Manufacturer Part Number: 17HM19-1684S
- Motor Type: Bipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 44Ncm(62.3oz.in)
- Rated Current/phase: 1.68A
- Voltage: 2.8V
- Phase Resistance: 1.65ohms
- Inductance: 4.1mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 47mm
- Shaft Diameter: Φ5mm
- Shaft Length: 20mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 370g
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
Resources
- Full Datasheet: 17HM19-1684S.pdf
Electrical Specification | |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 44 |
Holding Torque(oz.in) | 62.3 |
Inductance(mH) | 4.1 |
Phase Resistance(ohm) | 1.65 |
Rated Current(A) | 1.68 |
Step Angle(°) | 0.9 |
Physical Specification | |
Body Length(mm) | 48 |
Frame Size(mm) | 42 x 42 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 20 |
No. of Lead | 4 |
Lead Length(mm) | 500 |
Weight(g) | 350 |