- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 17 Bipolar 0.9deg 11Ncm (15.6oz.in) 1.2A 3.6V 42x42x21mm 4 Wires 
Nema 17 Bipolar 0.9deg 11Ncm (15.6oz.in) 1.2A 3.6V 42x42x21mm 4 Wires
Nema 17 Bipolar 0.9deg 11Ncm (15.6oz.in) 1.2A 3.6V 42x42x21mm 4 Wires 4 4
SKU: 17HM08-1204S
$12.04
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $11.15 | $10.70 | $10.25 | $9.81 |
| Save | 7% | 11% | 15% | 19% |
Availability: 667
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x21mm. It has 4 wires, each phase draws current 1.2A, with holding torque 11Ncm (15.6oz.in).
Electrical Specification
- Manufacturer Part Number: 17HM08-1204S
- Motor Type: Bipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 11Ncm(15.6oz.in)
- Rated Current/phase: 1.2A
- Voltage: 3.6V
- Phase Resistance: 3.0ohms
- Inductance : 2.2mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 21mm
- Shaft Diameter: Φ5mm
- Shaft Length: 17mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight : 150g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
- Full Datasheet: 17HM08-1204S.pdf
| Electrical Specification | |
| Inductance(mH) | 3 |
| Phase Resistance(ohm) | 3 |
| Rated Current(A) | 1.2 |
| Step Angle(deg.) | 0.9 |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 11 |
| Holding Torque(oz.in) | 15.6 |
| Physical Specification | |
| Frame Size(mm) | Nema 17 (42 x 42) |
| Body Length(mm) | 21 |
| Single Shaft/Dual Shaft | Single Shaft |
| Output Shaft Type | O |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 17 |
| No. of Lead | 4 |
| Lead Length(mm) | 300 |
| Weight(g) | 150 |
