- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 16 Unipolar 1.8deg 8Ncm (11.3oz.in) 0.5A 6.5V 39x39x20mm 6 Wires
Nema 16 Unipolar 1.8deg 8Ncm (11.3oz.in) 0.5A 6.5V 39x39x20mm 6 Wires
Nema 16 Unipolar 1.8deg 8Ncm (11.3oz.in) 0.5A 6.5V 39x39x20mm 6 Wires
5
1
SKU: 16HS08-0506S
$9.95
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $9.16 | $8.76 | $8.36 | $7.96 |
| Save | 8% | 12% | 16% | 20% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This unipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x20mm. It has 6 wires, each phase draws 0.5A at 6.5V, with holding torque 8Ncm (11.3oz.in).
Electrical Specification
- Manufacturer Part Number: 16HS08-0506S
- Motor Type: Unipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 8Ncm(11.3oz.in)
- Rated Current/phase: 0.5A
- Voltage: 6.5V
- Phase Resistance: 13ohms
- Inductance: 7.5mH ± 20%(1KHz)
Physical Specification
- Frame Size: 39 x 39mm
- Body Length: 20mm
- Shaft Diameter: Φ5mm
- Shaft Length: 19mm
- Number of Leads: 6
- Lead Length: 300mm
- Weight: 120g
Connection
A+ |
O+ |
A- |
B+ |
O- |
B- |
BLK |
YEL |
GRN |
RED |
WHT |
BLU |
Resources
- Full Datasheet: 16HS08-0506S.pdf
| Electrical Specification | |
| Inductance(mH) | 6.4 |
| Phase Resistance(ohm) | 14 |
| Rated Current(A) | 0.5 |
| Step Angle(deg.) | 1.8 |
| Bipolar/Unipolar | Unipolar |
| Holding Torque(Ncm) | 8 |
| Holding Torque(oz.in) | 11.3 |
| Physical Specification | |
| Frame Size(mm) | Nema 16 (39 x 39) |
| Body Length(mm) | 20 |
| Single Shaft/Dual Shaft | Single Shaft |
| Output Shaft Type | O |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 19 |
| No. of Lead | 6 |
| Lead Length(mm) | 300 |
| Weight(g) | 120 |
