- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 16 Bipolar 0.9deg 18Ncm (25.5oz.in) 0.4A 12V 39x39x34mm 4 Wires 
Nema 16 Bipolar 0.9deg 18Ncm (25.5oz.in) 0.4A 12V 39x39x34mm 4 Wires
Nema 16 Bipolar 0.9deg 18Ncm (25.5oz.in) 0.4A 12V 39x39x34mm 4 Wires 5 1
SKU: 16HM13-0404S
$12.10
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $11.20 | $10.75 | $10.30 | $9.86 |
| Save | 7% | 11% | 15% | 19% |
Availability: 102
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x34mm. It has 4 wires, each phase draws 0.4A at 12V, with holding torque 18Ncm (25.5oz.in).
Electrical Specification
- Manufacturer Part Number: 16HM13-0404S
- Motor Type: Bipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 18Ncm(25.5oz.in)
- Rated Current/phase: 0.4A
- Voltage: 12V
- Phase Resistance: 30ohms
- Inductance: 43mH ± 20%(1KHz)
Physical Specification
- Frame Size: 39 x 39mm
- Body Length: 34mm
- Shaft Diameter: Φ5mm
- Shaft Length: 22mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 210g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Resources
- Full Datasheet: 16HM13-0404S.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 18 |
| Holding Torque(oz.in) | 25.5 |
| Inductance(mH) | 43 |
| Phase Resistance(ohm) | 30 |
| Rated Current(A) | 0.4 |
| Step Angle(°) | 0.9 |
| Physical Specification | |
| Body Length(mm) | 34 |
| Frame Size(mm) | 39 x 39 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | D-Cut |
| Shaft Diameter(mm) | 5 |
| Shaft Length(mm) | 22 |
| No. of Lead | 4 |
| Lead Length(mm) | 300 |
| Weight(g) | 180 |
