- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm 
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm
Keyway Dual Shaft Nema 34 Stepper Motor 13Nm (1841oz.in) 5A 86x86x150mm 5 2
SKU: 34HS59-5004D
$101.51
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $92.68 | $88.27 | $83.85 | $79.44 |
| Save | 9% | 13% | 17% | 22% |
Availability: 9933
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Electrical Specification
- Manufacturer Part Number: 34HS59-5004D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 13Nm(1841oz.in)
- Rated Current/phase: 5A
- Voltage: 5V
- Phase Resistance: 1ohms
- Inductance: 11mH ± 20%(1KHz)
Physical Specification
- Frame Size: 86 x 86mm
- Body Length: 151.5mm
- Shaft Diameter: Φ14mm
- Shaft Length: 37mm
- Key-Way Length: 25mm
- Rear Shaft Length: 15mm
- Rear Shaft Diameter: 12mm
- Number of Leads: 4
- Lead Length: 500mm
Connection
A+ | A- | B+ | B- |
Red | Black | Yellow | Blue |
Resources
- Motor Datasheet: 34HS59-5004D.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 1300 |
| Holding Torque(oz.in) | 1841 |
| Inductance(mH) | 11 |
| Phase Resistance(ohm) | 1 |
| Rated Current(A) | 5 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 151.5 |
| Frame Size(mm) | 86 x 86 |
| Single Shaft/Dual Shaft | Dual Shaft |
| Shaft Type | KeyWay |
| Shaft Diameter(mm) | 14 |
| Shaft Length(mm) | 37 |
| No. of Lead | 4 |
| Lead Length(mm) | 500 |
| Weight(g) | 5450 |
