- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
Nema 42 CNC Stepper Motor Bipolar 22Nm (3115oz.in) 6.0A 110x150mm 4 Wires
-600x600.jpg)
-70x70.jpg)
-1000x1000.jpg)
Nema 42 CNC Stepper Motor Bipolar 22Nm (3115oz.in) 6.0A 110x150mm 4 Wires
Nema 42 CNC Stepper Motor Bipolar 22Nm (3115oz.in) 6.0A 110x150mm 4 Wires
5
1
SKU: 42HS59-6004S
$148.30
Bulk quantity price break:
| Qty | 5 | 10 | 50 | 100 |
|---|---|---|---|---|
| Price | $140.88 | $133.47 | $126.05 | $118.64 |
| Save | 5% | 10% | 15% | 20% |
Availability: 100
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
askquestion
This Nema 42 cnc stepper motor with size 110x110x150mm. It has 4 wires, each phase draws 6A, with holding torque 22Nm (3115oz.in).
Electrical Specification
- Manufacturer Part Number: 42HS59-6004S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 22Nm(3115oz.in)
- Rated Current/phase: 6.0A
- Voltage: 4.8V
- Phase Resistance: 0.8ohms
- Inductance: 14mH ± 20%(1KHz)
Physical Specification
- Frame Size: 110 x 110mm
- Body Length: 150mm
- Shaft Diameter: Φ19mm
- Shaft Length: 55.37mm
- Key Way Length: 35mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 10.9kg
Connection
A+ |
A- |
B+ |
B- |
Red |
Green |
Yellow |
Blue |
Resources
- Full Datasheet: 42HS59-6004S.pdf
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Holding Torque(Ncm) | 2200 |
| Holding Torque(oz.in) | 3115 |
| Inductance(mH) | 14 |
| Phase Resistance(ohm) | 0.8 |
| Rated Current(A) | 6 |
| Step Angle(°) | 1.8 |
| Physical Specification | |
| Body Length(mm) | 150 |
| Frame Size(mm) | 110 x 110 |
| Single Shaft/Dual Shaft | Single Shaft |
| Shaft Type | KeyWay |
| Shaft Diameter(mm) | 19 |
| Shaft Length(mm) | 55.37 |
| No. of Lead | 4 |
| Lead Length(mm) | 500 |
| Weight(g) | 10900 |
