A Nema 24 stepper motor is a stepper motor with a 2.4 x 2.4 inch (60 x 60 mm) faceplate. If you need more torque from a Nema 23 motor, but can't shift to a Nema 34, then the Nema 24 is your answer. They are larger than the standard 23 frame motor, but have the same mounting and shaft dimensions, plus higher torque. A wide range of motor windings and stack lengths are readily available. We have 8-wire motors that can be connected in all possible configurations: series, unipolar or parallel to maximize flexibility for your application. We can also customize the windings to perfectly match your voltage, current and maximum torque at operating speed.

NEMA stepper motor sizes depend on the frame size of the stepper motor. NEMA means the standards set by “National Electrical Manufacturers Association”, which is comprised of 560 major electrical manufacturers in the United States, primarily consisting of manufacturers of equipment and devices for power generation, transmission, distribution, and power applications. The purpose of standard setting is to eliminate misunderstandings between electrical product manufacturers and users and to specify the safety of these product applications.