Nema 23 is a stepper motor with a 2.3 x 2.3 inch faceplate. It is suitable for 3d printer, robot arm, cnc machine,etc. In low-speed applications, the stepper motor can be driven at the desired speed without missing a single step.

This stepper motor has different torque, the max torque is 3 Nm. We provide nema 23 stepper motor datasheet and torque curve. The torque is different for each operating speed, but decreases as the stepping speed increases. The reason is the operating principle of the stepper motor. The drive signal of the stepper motor generates a magnetic field in the coil of the motor to generate a step force. The time it takes for the magnetic field to reach its maximum intensity depends on the inductance of the coil, the drive voltage and current limit. As the drive speed increases, the coil maintains its full strength for a shorter period of time and the torque that the motor can produce decreases.

Sort By:
Show:

Nema 23 - 57 x 57mm

E Series Nema 23 Stepper Motor Bipolar 1.8deg 4.8 Nm(679.87oz.in) 6.0A 86x86x80mm 4 Wires
New

E Series Nema 23 Stepper Motor Bipolar 1.8deg 4.8 Nm(679.87oz.in) 6.0A 86x86x80mm 4 Wires

SKU: 23HE22-2804S
Electrical Specification Manufacturer Part Number: 23HE22-2804S Number of phase: 2 Step Angle: 1.8 deg Holding Torque: 1.26 Nm(849.84oz.in) Rated Current/phase: 2.8 A Phase Resistance: 0.9 ohms± 10% Inductance: 2.5 mH ± ..
$11.96 As low as : $10.63
Show:
Showing 1 to 20 of 34 (2 Pages)
  • Ship from
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
  • Frame Size(mm)
  • Step Angle(°)
  • Holding Torque(Ncm)
  • Holding Torque(oz.in)
  • Bipolar/Unipolar
  • Rated Current(A)
  • Body Length(mm)
  • Single Shaft/Dual Shaft
  • Shaft Type
  • Shaft Diameter(mm)
  • Shaft Length(mm)
  • Phase Resistance(ohm)
  • Inductance(mH)
  • No. of Lead