Nema 17 Bipolar 1.8deg 16Ncm (22.6oz.in) 1A 3.7V 42x42x20mm 4 Wires

     21 reviews  |  Write a review
SKU: 17HS08-1004S
$8.11

Bulk quantity price break:

Qty 5 10 50 100
Price $7.72 $7.34 $6.95 $6.57
Save 5% 9% 14% 19%
Availability: 2212

Qty

  • Connectors: Molex, Harwin, Tyco/AMP, JST etc.
  • Lead wires & cables: Special lengths, Protective hose
  • Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
  • Winding: Resistance, Inductance, Rated Current, etc.
askquestion

This is the shortest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 16Ncm (22.6oz.in).

Note: Currently this motor has two appearanc,but with the same performance. One is blacka and the other is silver. If you have a prefer appearance,please leave us a message when ordering. Or the motor will be shipped randomly regardless of the appearance.

Electrical Specification

  • Manufacturer Part Number: 17HS08-1004S
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 16Ncm(22.6oz.in)
  • Rated Current/phase: 1.0A
  • Voltage: 3.7V
  • Phase Resistance: 3.7ohms
  • Inductance: 4.5mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 42 x 42mm
  • Body Length: 20mm
  • Shaft Diameter: Φ5mm
  • Shaft Length: 20mm
  • D-cut Length: 16.5mm
  • Number of Leads: 4
  • Lead Length: 400mm
  • Weight: 140g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 16
Holding Torque(oz.in) 18.4
Inductance(mH) 4.5
Phase Resistance(ohm) 3.5
Rated Current(A) 1
Step Angle(°) 1.8
Physical Specification
Body Length(mm) 20
Frame Size(mm) 42 x 42
Single Shaft/Dual Shaft Single Shaft
Shaft Type D-Cut
Shaft Diameter(mm) 5
Shaft Length(mm) 20
No. of Lead 4
Lead Length(mm) 400
Weight(g) 150

Write a review

Note: HTML is not translated!
Captcha

Do you have any questions about Nema 17 Bipolar 1.8deg 16Ncm (22.6oz.in) 1A 3.7V 42x42x20mm 4 Wires?

Captcha