- Your shopping cart is empty!
WELCOME TO STEPPERONLINE
The Nema17 stepper motor is a stepper motor with an end face size of 1.7 inches x 1.7 inches. Available in single and dual shaft, 1.8° step angle and 0.9° step angle, round and cut shafts, and can be customized. The driving voltage is 12-24V. The maximum speed can be as high as 2000 rpm. Widely used in 3D printers, engraving machines, film cutting machines and other occasions.
Nema 17 - 42 x 42mm
Nema 17 Bipolar 1.8deg 13Ncm (18.4oz.in) 1A 3.5V 42x42x20mm 4 Wires
SKU: 17HS08-1004S
$8.32
As low as : $6.51
Nema 17 Bipolar 1.8deg 13Ncm (18.4oz.in) 0.7A 2.9V 42x42x25mm 4 Wires
SKU: 17HS10-0704S
$8.50
As low as : $5.97
Nema 17 Unipolar 1.8deg 15.8Ncm (22.4oz.in) 0.31A 12V 42x42x33mm 6 Wires
SKU: 17HS13-0316S
$8.84
As low as : $6.96
-15%
Nema 17 Bipolar 1.8deg 26Ncm (36.8oz.in) 0.4A 12V 42x42x34mm 4 Wires
SKU: 17HS13-0404S1
Dual Shaft Nema 17 Bipolar 1.8deg 26Ncm (36.8oz.in) 0.4A 12V 42x34mm 4 Wires
SKU: 17HS13-0404D
$8.66
As low as : $6.77
Nema 17 Unipolar 1.8deg 16Ncm (22.7oz.in) 0.95A 4V 42x42x33mm 6 Wires
SKU: 17HS13-0956S
$8.84
As low as : $6.96
Nema 17 Bipolar 1.8deg 22Ncm (31oz.in) 1.33A 2.8V 42x42x34mm 4 Wires
SKU: 17HS13-1334S
$8.66
As low as : $6.77
Dual Shaft Nema 17 Bipolar 1.8deg 22Ncm (31oz.in) 1.33A 2.8V 42x33mm 4 Wires
SKU: 17HS13-1334D
$8.66
As low as : $6.77
Nema 17 Bipolar 1.8deg 40Ncm (56.6oz.in) 0.4A 12V 42x42x39mm 4 Wires
SKU: 17HS15-0404S
$9.32
As low as : $7.30
Nema 17 Unipolar 1.8deg 26Ncm (37oz.in) 0.4A 12V 42x42x39mm 6 Wires
SKU: 17HS15-0406S
$9.32
As low as : $7.30
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.85A 5.4V 42x42x39mm 4 Wires
SKU: 17HS15-0854S
$9.32
As low as : $7.30
-13%
Nema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Cable & Connector
SKU: 17HS15-1504S1
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.50A, with holding torque 45Ncm (63.74oz.in).
Electrical Specification
Manufacturer Part Number: 17H..
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 1.68A 2.8V 42x42x39mm 4 Wires
SKU: 17HS15-1684S
$9.32
As low as : $7.30
Dual Shaft Nema 17 Bipolar 45Ncm(63.74oz.in) 2A 42x42x40mm 4 Wires
SKU: 17HS16-2004D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws 2.00A at 2.2V, with holding torque 45Ncm (63.74oz.in).
Electrical Specification
Manufac..
$9.52
As low as : $6.28
Nema 17 Bipolar 1.8deg 36Ncm (51oz.in) 0.28A 15.7V 42x42x40mm 4 Wires
SKU: 17HS16-0284S
$9.32
As low as : $7.30
-13%
Nema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 1m Pin Connector
SKU: 17HS15-1504S-X1
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm (63.74oz.in).
Electrical Specification
Manufacturer Part Number: 1..
-13%
Nema 17 Bipolar 45Ncm (63.74oz.in) 1.5A 42x42x39mm 4 Wires w/ 300mm Pin Connector
SKU: 17HS15-1504S-X
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm (63.74oz.in).
Electrical Specification
Manufacturer Part Number: 17H..
Dual Shaft Nema 17 Bipolar 0.9deg 44Ncm (62.48oz.in) 1.68A 2.8V 42x42x48mm 4 Wires
SKU: 17HM19-1684D
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A at 2.8V, with holding torque 44Ncm (62.48oz.in).
Electrical Specification
Manufac..
$13.68
As low as : $11.15
Nema 17 Bipolar 45Ncm (64oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cable & Connector
SKU: 17HS16-2004S1
$9.32
As low as : $7.30
Nema 17 Unipolar 1.8deg 32Ncm (45.3oz.in) 0.4A 12V 42x42x48mm 6 Wires
SKU: 17HS19-0406S
$10.65
As low as : $8.34