Products
Your Cart

Nema 11 - 28 x 28mm

A Nema 11 stepper motor is a stepper motor with a 1.1 x 1.1 inch (28 x 28 mm) faceplate. Nema 11 high torque stepper motors feature high torque density in a small package. These high torque stepper motors deliver great value with no quality sacrifice. These motors are engineered to provide the highest possible torque but minimize vibration and audible noise. A wide range of motor windings and stack lengths are readily available, or the motors can be customized to meet your machine requirements. The standard 4 wire motors can be connected to give you more flexibility in your application. STEPPERONLINE can also have the windings customized to perfectly match your voltage, current and maximum torque at operating speeds.

NEMA stepper motor sizes depend on the frame size of the stepper motor. NEMA means the standards set by “National Electrical Manufacturers Association”, which is comprised of 560 major electrical manufacturers in the United States, primarily consisting of manufacturers of equipment and devices for power generation, transmission, distribution, and power applications. The purpose of standard setting is to eliminate misunderstandings between electrical product manufacturers and users and to specify the safety of these product applications.

Model: 11HS12-0674S
This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x31mm. It has 4 wires, each phase draws 0.67A at 3.8V, with holding torque 7Ncm (9.91oz.in). Electrical Specification Manufacturer Part Number: 11HS12-0674S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 7Ncm(9.91..
$13.20
Model: 11HS12-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x31.5mm. It has 4 wires, each phase draws 0.67A at 3.75V, with holding torque 7Ncm (9.91oz.in). Electrical Specification Manufacturer Part Number: 11HS12-0674D Motor Type: Bipolar Stepper Step Angle: 1.8 deg Hold..
$14.60
Model: 11HS12-0956D
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm (6.1oz.in). A 10mm rear shaft was for encoder or equals. Electrical Specification Manufacturer Part Number: 11HS12-0956D Motor Type: Unipolar Stepper Step Angle..
$13.69
Model: 11HS18-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x45mm. It has 4 wires, each phase draws 0.67A at 4.6V, with holding torque 9.5Ncm (13.5oz.in). Electrical Specification Manufacturer Part Number: 11HS18-0674S Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holding Torque: 10Ncm(13.5oz..
$15.13
Model: 11HS20-0674S
This bipolar nema 11 stepper motor with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A at 6.2V, with holding torque 12Ncm (17oz.in). Planetary Gearbox is available for this model. Electrical Specification Manufacturer Part Number: 11HS20-0674S Motor Type: Bipolar Stepper Step Angl..
$16.14
Model: 11HS20-0674D
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A at 6.2V, with holding torque 12Ncm (17.04oz.in). Electrical Specification Manufacturer Part Number: 11HS20-0674D Motor Type: Bipolar Stepper Step Angle: 1.8 deg Holdi..
$18.07
Showing 1 to 6 of 6 (1 Pages)
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.