Dual Shaft Nema 42 CNC Stepper Motor 30Nm(4248oz.in) 8A 110x110x201mm 4 Wires
$137.93
5 + $133.21
10 + $128.81
50 + $124.69
100 + $120.82
- In Stock: 10000
- Model: 42HS79-8004D
- Gross Weight: 12.68kg
- Certificated: ISO, CE, UKCA, RoHS
Available Options
Ships within 24 hours for items in stock!
This is the biggest cnc stepper motor we have, it with size 110x110x201mm. It has 4 wires, each phase draws 8A, allowing for a huge torque up to 30Nm(4248oz.in). A rear shaft can mount encoder, hand wheel or equals.
For all Nema 42 stepper motors, we recommend a dedicated driver: DM2282T.
This driver can be directly connected to 180 - 240VAC power supply, so you don't need an additional switching power supply.
This driver can be directly connected to 180 - 240VAC power supply, so you don't need an additional switching power supply.
Electrical Specification
- Manufacturer Part Number: 42HS79-8004D
- Step Angle: 1.8deg
- Holding Torque: 30Nm(4248oz.in)
- Rated Current/phase: 8.0A
- Phase Resistance: 1ohms
- Inductance: 17.5mH±20%(1KHz)
Physical Specification
- Frame Size: 110 x 110mm
- Body Length: 201mm
- Shaft Diameter: Φ19mm
- Shaft Length: 55.5mm
- Key Way Length: 35mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 12.5kg
Connection
A+ |
A- |
B+ |
B- |
Red |
Green |
Yellow |
Blue |
Electrical Specification | |
Has Torque/Thrust Curve? | Yes |
Inductance(mH) | 17.5 |
Phase Resistance(ohm) | 1 |
Product Type | Hybrid Stepper Motor |
Rated Current(A) | 8 |
Step Angle(deg.) | 1.8 |
Bipolar/Unipolar | Bipolar |
Holding Torque(Ncm) | 3000 |
Holding Torque(oz.in) | 4248 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
IP Rating | 40 |
Frame Size(mm) | Nema 42 (110 x 110) |
Product Series | S |
Body Length(mm) | 201 |
Single Shaft/Dual Shaft | Dual Shaft |
Output Shaft Type | KeyWay |
Shaft Diameter(mm) | 19 |
Shaft Length(mm) | 55.5 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 12500 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox