Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6Wires 17HM19-0406D

Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6Wires

$13.86

(10000)

Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6Wires

     0 reviews  |  Write a review
SKU: 17HM19-0406D
$13.86

Bulk quantity price break:

Qty 3 10 30 100
Price $13.17 $12.48 $11.78 $11.09
Save 5% 10% 15% 20%
Availability: 10000
askquestion

This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A at 12V, with holding torque 32Ncm (45.3oz.in), A rear shaft is available.

Electrical Specification

  • Manufacturer Part Number: 17HM19-0406D
  • Motor Type: Unipolar Stepper
  • Step Angle: 0.9 deg
  • Holding Torque: 32Ncm(45.3oz.in)
  • Rated Current/phase: 0.4A
  • Voltage: 12V
  • Phase Resistance: 30ohms
  • Inductance: 38mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 42 x 42mm
  • Body Length: 48mm
  • Shaft Diameter: Φ5mm
  • Front Shaft Length: 24mm
  • D-cut Length: 15mm
  • Rear Shaft Length: 10mm
  • Number of Leads: 6
  • Lead Length: 500mm
  • Weight: 370g

Connection

A+
O+
A-
B+
O-
B-
RED
BLK
YEL
BLU
ORG
GRN

Resources

Electrical Specification
Bipolar/Unipolar Unipolar
Step Angle(°) 0.9
Holding Torque (Ncm) 32
Holding Torque (oz.in) 45.3
Rated Current (A) 0.9
Phase Resistance(ohm) 30
Inductance(mH) 38
Physical Specification
Frame Size(mm) 42x42
Body Length(mm) 48
Single Shaft/Dual Shaft Dual Shaft
Shaft Type D-Cut
Shaft Diameter(mm) 5
Shaft Length(mm) 24
No. of Lead 6
Lead Length(mm) 500
Weight(g) 350

Write a review

Note: HTML is not translated!

Do you have any questions about Dual Shaft Nema 17 Unipolar 0.9deg 32Ncm (45.3oz.in) 0.4A 12V 42x48mm 6Wires?