Dual Shaft Nema 17 Unipolar 0.9deg 16Ncm(22.66oz.in) 0.3A 42x42x34mm 6 Wires
$9.46
5 + $9.01
10 + $8.61
50 + $8.24
100 + $7.90
- In Stock: 10000
- Model: 17HM13-0316D
- Gross Weight: 0.40kg
- Certificated: ISO, CE, UKCA, RoHS
Available Options
Ships within 24 hours for items in stock!
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31A at 12V, with holding torque 16Ncm(22.66oz.in). A rear shaft is available.
Electrical Specification
- Manufacturer Part Number: 17HM13-0316D
- Motor Type: Unipolar Stepper
- Step Angle: 0.9deg
- Holding Torque: 16Ncm(22.66oz.in)/23Ncm(31.8oz.in)
- Rated Current/phase: 0.31A/0.22A
- Phase Resistance: 38.5ohms/77.0ohms
- Inductance: 36mH±20%(1KHz)/144mH±20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 34mm
- Shaft Diameter: Φ5mm
- Front Shaft Length: 20mm
- D-cut Length: 15mm
- Rear Shaft Length: 13mm
- Number of Leads: 6
- Lead Length: 500mm
- Weight: 280g
Connection
Bipolar
A+ |
A- |
B+ |
B- |
BLK |
GRN |
RED |
BLU |
Unipolar
A+ |
O+ |
A- |
B+ |
O- |
B- |
BLK |
YEL |
GRN |
RED |
WHT |
BLU |
Electrical Specification | |
Has Torque/Thrust Curve? | No |
Inductance(mH) | 36 |
Phase Resistance(ohm) | 35.8 |
Product Type | Hybrid Stepper Motor |
Rated Current(A) | 0.31 |
Step Angle(deg.) | 0.9 |
Bipolar/Unipolar | Unipolar |
Holding Torque(Ncm) | 16 |
Holding Torque(oz.in) | 22.66 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
Frame Size(mm) | Nema 17 (42 x 42) |
Product Series | S |
Body Length(mm) | 34 |
Single Shaft/Dual Shaft | Dual Shaft |
Output Shaft Type | D |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 20 |
No. of Lead | 6 |
Lead Length(mm) | 500 |
Weight(g) | 280 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox