Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires

Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires

$14.71

(359)

Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires

     0 reviews  |  Write a review
SKU: 17HS19-1684D
$14.71

Bulk quantity price break:

Qty 3 10 30 100
Price $14.27 $12.48 $12.04 $10.70
Save 3% 15% 18% 27%
Availability: 359

Qty

  • Connectors: Molex, Harwin, Tyco/AMP, JST etc.
  • Lead wires & cables: Special lengths, Protective hose
  • Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
  • Winding: Resistance, Inductance, Rated Current, etc.
askquestion

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 1.68A, with holding torque 44Ncm (62.3oz.in). It's very good choice for 3D printer, a rear shaft is available.

Electrical Specification

  • Manufacturer Part Number: 17HS19-1684D
  • Motor Type: Bipolar Stepper
  • Step Angle: 1.8 deg
  • Holding Torque: 44Ncm(62.3oz.in)
  • Rated Current/phase: 1.68A
  • Voltage: 2.8V
  • Phase Resistance: 1.65ohms
  • Inductance: 2.8mH ± 20%(1KHz)

Physical Specification

  • Frame Size: 42 x 42mm
  • Body Length: 48mm
  • Shaft Diameter: Φ5mm
  • Front Shaft Length: 24mm
  • Rear Shaft Length: 13mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Weight: 390g

Connection

A+
A-
B+
B-
Black
Green
Red
Blue

Resources

Electrical Specification
Bipolar/Unipolar Bipolar
Holding Torque(Ncm) 44
Holding Torque(oz.in) 62.3
Inductance(mH) 2.8
Phase Resistance(ohm) 1.65
Rated Current(A) 1.68
Step Angle(°) 1.8
Bipolar/Unipolar Bipolar
Step Angle(°) 1.8
Holding Torque (Ncm) 44
Holding Torque (oz.in) 62.3
Rated Current (A) 1.68
Phase Resistance(ohm) 1.65
Physical Specification
Frame Size(mm) 42x42
Body Length(mm) 48
Single Shaft/Dual Shaft Dual Shaft
Shaft Type O
Shaft Diameter(mm) 5
Shaft Length(mm) 24
No. of Lead 4
Lead Length(mm) 500
Weight(g) 400

Write a review

Note: HTML is not translated!

Do you have any questions about Dual Shaft Nema 17 Bipolar 1.8deg 44Ncm (62.3oz.in) 1.68A 2.8V 42x48mm 4 Wires?