Dual Shaft Nema 11 Unipolar 1.8deg 4.3Ncm(6.1oz.in) 0.95A 28x28x31.5mm 6 Wires
$10.44
5 + $9.95
10 + $9.50
50 + $9.09
100 + $8.71
- In Stock: 10000
- Model: 11HS12-0956D
- Gross Weight: 0.20kg
- Certificated: ISO, CE, UKCA, RoHS
Available Options
Ships within 24 hours for items in stock!
This unipolar stepper motor with step angle 1.8deg and size 28x28x31.5mm. It has 6 wires, each phase draws 0.95A at 2.66V, with holding torque 4.3Ncm(6.1oz.in). A 10mm rear shaft was for encoder or equals.
Electrical Specification
- Manufacturer Part Number: 11HS12-0956D
- Motor Type: Unipolar Stepper
- Step Angle: 1.8deg
- Holding Torque: 4.3Ncm(6.1oz.in)
- Rated Current/phase: 0.95A
- Phase Resistance: 2.8ohms
- Inductance: 1mH±20%(1KHz)
Physical Specification
- Frame Size: 28 x 28mm
- Body Length: 31.5mm
- Shaft Diameter: Φ5mm
- Front Shaft Length: 20mm
- Rear Shaft Length: 10mm
- Number of Leads: 6
- Lead Length: 300mm
- Weight: 110g
Connection
A+ |
O+ |
A- |
B+ |
O- |
B- |
RED |
BLK |
YEL |
BLU |
ORG |
GRN |
Electrical Specification | |
Has Torque/Thrust Curve? | Yes |
Inductance(mH) | 1 |
Phase Resistance(ohm) | 2.8 |
Product Type | Hybrid Stepper Motor |
Rated Current(A) | 0.95 |
Step Angle(deg.) | 1.8 |
Bipolar/Unipolar | Unipolar |
Holding Torque(Ncm) | 4.3 |
Holding Torque(oz.in) | 6.1 |
Physical Specification | |
Inventory Method | Dedicated Inventory |
IP Rating | 40 |
Frame Size(mm) | Nema 11 (28 x 28) |
Product Series | S |
Body Length(mm) | 31.5 |
Single Shaft/Dual Shaft | Dual Shaft |
Output Shaft Type | O |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 20 |
No. of Lead | 6 |
Lead Length(mm) | 300 |
Weight(g) | 110 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox